PDA

View Full Version : 3dr Saloon, stripped, with LOADS of extras! now only ?100!



Cathy
29-07-05, 11:33 PM
I have for sale my project, got it before christmas to do as a stripped street car, but due to me wanting a new car im getting rid.

Its a E reg nova, was a 1ltr.

I have stripped it and done some body work, cut out the bulk head, MK1 Hatch front wings, 2 bonnets, one custom one i started to do myself.
Doors which i have sanded down and primed, delocked the passenger door.

Changed the Ignition barrel so it matches the same key as the door.

The engine in it is a 1.4SR engine, rebuilt 3k miles ago, i fitted it and brought BRAND NEW:-

Rubber Engine mounts all round!
Dizzy cap
Rotor Arm
Spark plugs
Radiator
Oil

It turns over fine and sometimes fires up, its something to do with the carb, it came with no airbox so thats why i think its not running properly, if you know anything about novas then you'll be able to fix it.

I also fitted a 1.4 CARB fuel tank and a Fuel return pipe.
Comes with drive shafts but not fitted.
I also fitted a GSI brake servo.
You also get 2 sets of clocks, one with lockwood white dials and astra DIGI dash, no plastic on it, and also a BRAND NEW loom for the back which you connect to your current loom, which i brought off ebay.
You also get a battery which is on the car at the mo, plus TWO other batteries which i want rid of.
And you get TWO sets of front windows, one set from these doors and from the old doors.
The passenger door hinge part that connects on car has rusted off so that will need welding.

comes with a Nova saloon 1.ltr exhast system, New.
And a 1.4 from cat back exhast, was fitted for 3 weeks then removed.

Can come with the Harness for an extra ?30.

Walk through guide at www.stuffing.freeserve.co.uk/Project

ALOT of time an effort has gone into this car, altho is may look crap i have stripped it alot, ie, Underseal, priming engine bay etc.

The car...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0041.JPG

Mk2 front bumper...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0042.JPG

The engine is at a slant to the right because doesnt have the gearbox mount to chasis nult+bolt, there is a bolt to hold it in place, not the right one tho...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0043.JPG

Both sets of clocks...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0044.JPG

Interior with Window seals...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0045.JPG

Stripped out rear...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0046.JPG

Removed underseal under carpet and stripped front...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0047.JPG


http://www.stuffing.freeserve.co.uk/hatch/IMAG0048.JPG

Door...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0049.JPG

Hole under drivers seat, 10p size...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0050.JPG

Hole on passenger side, width and lenght of a pencil...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0051.JPG

window seals...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0052.JPG

the back...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0053.JPG

delocked passenger door...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0054.JPG

the bonnet with my own air vent, needs smoothing off...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0055.JPG

same again...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0056.JPG

Other bonnet with bad boy extention, and celica GT4 vent in it, needs a good sand down, skim and painted..
http://www.stuffing.freeserve.co.uk/hatch/IMAG0057.JPG

the vent and bad boy...
http://www.stuffing.freeserve.co.uk/hatch/IMAG0059.JPG


Car is in Sheffield S17 and needs to be front jack-up towed or lorried away.

Im asking ?200 ono for the amount ive spent on buying the engine with new parts, gt4 vented bonnet and the batteries and dials etc.

I want rid of this car asap!

Neil

Im also adding these in, new:-
http://i3.ebayimg.com/02/i/04/2b/07/c0_1_b.JPG
http://i14.ebayimg.com/01/i/04/32/c9/29_1_b.JPG
http://i1.ebayimg.com/03/i/04/34/04/05_1_b.JPG

ready to fit onto the car.


Now ?100 ono, i want rid of all this lot ASAP!

This car is solid underneith and in the engine bay!

I need rid asap!