PDA

View Full Version : Fuse keeps blowing



tom_beverley
22-07-05, 07:15 PM
The fuse for my wipers and horn keeps blowing as soon as I turn on the ignition. I've looked at the connections under the bonnet and can't see anything wrong, what could it be?

Cheers

Tom

Adam
22-07-05, 07:20 PM
Not 100%
but you could try checking the earth connections to the wiper motor etc.

And make sure you have the right amp fuse in, i have heard it done before :wink:

dan23
22-07-05, 10:05 PM
sounds like earth could b dodgey relay

Riggy
31-07-05, 11:23 PM
i had this probleam and it turned out that one of the 2 wires that goes to the horn had split and was shorting out on the engine mount

princey
01-08-05, 07:52 AM
maybe you are using the wrong ampage or whatever it is ie 15 instead of 10

Lee
01-08-05, 08:48 AM
yup, my g/f's SR did the same thing last night, with the correct 30amp fuse. Had to drive down the M4 in the pouring rain following a mate. Not good.

will be checking the wiring tonight.

novajay
02-08-05, 01:31 PM
check the realy by the fusebox mate :wink:
could be faulty happened on mine not long back