been buying up ebay again

[General Baxter]

blinging!

well did not buy them thu ebay, he ended early :D

http://i15.ebayimg.com/03/i/03/f4/14/2b_1_b.JPG
http://i18.ebayimg.com/04/i/04/7f/4c/51_1_b.JPG
http://i14.ebayimg.com/02/i/04/7f/52/95_1_b.JPG

bargin at ?125 picking them up sat :P

[Jack]

?125 for some panels that someone has gone at with a chisel? :lol:

[Mike.]

i can't believe you got that bonnet for 35quid :lol:

[Adam Moran]

Those wings have been up before on e-bay. Considered them myself but when i found out there patteren parts i left them.

Good luck fitting them :wink:

[RJM25R]

the guy keeps doin them and selling. u are the 3rd person i've read about getting them. they aren't good quality!!

[General Baxter]

these are GM parts iv got a copy of the recept for them from vaxhall at ?90each a wing!

+ you see a few on ebay, because he makes them!

[Adam Moran]

GM wings DONT have indicator holes in them ;)

[General Baxter]

other way around!

pattern parts dont! GM do!

i can see i big debate going on here ;)

[5_door owner]

who give's a shit lol, aslong as they fit right and look good, and if they are shit you could always cut out the louvre's and weld them onto gm parts (with the welder you bought on ebay lmao)

[benji]

other way around!

pattern parts dont! GM do!

i can see i big debate going on here ;)

i have 2 sets of wings in the garage, mk1 pattern, mk2 GM neither have indicator holes

[novaco]

ive gotta say baxter is right!
i bought 2 pattern wings and they didnt have any indercator holes!

i was actully quite surprised as they were quite a good fit and they didnt need triming or anything!

[STE Novavanman]

depends where you get your pattern parts from some have the hole some dont but gm dont

[dan-hipgrave]

as Novavanman says - depends where you go, ive got pattern parts with indicator holes..

[Mike.]

ive gotta say baxter is right!
i bought 2 pattern wings and they didnt have any indercator holes!

i was actully quite surprised as they were quite a good fit and they didnt need triming or anything!

i've got 2 pattern wings on my nova and they've got indicator holes

[Snowface]

has anyone ever thought that he drilled the god dam indicator holes before he primed the wings? Make sense after all.

[General Baxter]

bom bom tish

[jamie gsi16v]

ha ha lol i bought the same bonnet off this bloke for my mate for 25quid and wings 20quid each 65 quid total lol. what baxter forgot to say was everythings second hand and the bloke neva does it to new parts. he goes to the scrappers picks random pannels up and presses vents in, hes in a win win situation!

[peester]

i like the pressed wings, though if it were me ide just have had the one.. good good..

[Rick Draper]

other way around!

pattern parts dont! GM do!

i can see i big debate going on here ;)

GM wings do not have any indicator holes in them, neither do they have holes for the wing mounted ariel. Once you know proper facts then post about them instead of talking bollocks.

[Rexy]

Anybody really give a flying Fuck?

Good luck fitting them fella, im sure they will look nice.

[Stuart]

i have a pair of patter MK1 wings from SEL and they fit fine, have the indcator holes punched in and no aerial hole lol

like it really matters.

[Rick Draper]

Anybody really give a flying Fuck?

Good luck fitting them fella, im sure they will look nice.

I would say it does if someone is looking on the site for some new wings and they dont want any ariel or indicator holes, they go to sel imperial cause "someone on NL says they come with no indicator holes" then they turn up with holes in them, more money needed to get them welded and filled.

+ I dont suffer fools and this boy is a fool. Bit like the majority of people who now post on these forums, yet another teenage post count whore :roll: :roll: .

[Stuart]

new song for wheetus there "im jsut a teenage post count whore"


lmao

[Chris]

the guy keeps doin them and selling. u are the 3rd person i've read about getting them. they aren't good quality!!

I have a bonnet, I am pressuming they are from the bloke round Northampton way? My bonnet is shocking all the paint is in a mess where the vents have been pressed in, it needs a fair bit of work to get it to a standard that I will be happy with it on my car. In his advert it stated that some refinishing will be required around where the vents have been put in but mine is taking the piss

Chris

[Mike.]

+ I dont suffer fools and this boy is a fool. Bit like the majority of people who now post on these forums, yet another teenage post count whore :roll: :roll: .

thats a bit harsh, don't tar us all with the same brush

[Snowface]

the wing i got from SEL Imperial a few months back had neither the Ariel or Indicator holes.

swings and roundabouts.

[STE Novavanman]

new song for wheetus there "im jsut a teenage post count whore"


lmao

more like the new game song "hate it or love it ill post until my arms drop off my post will always be on top"

[Rick Draper]

+ I dont suffer fools and this boy is a fool. Bit like the majority of people who now post on these forums, yet another teenage post count whore :roll: :roll: .

thats a bit harsh, don't tar us all with the same brush

I would happily tar and feather all the teenage post count whores on this site.

[STE Novavanman]

+ I dont suffer fools and this boy is a fool. Bit like the majority of people who now post on these forums, yet another teenage post count whore :roll: :roll: .

thats a bit harsh, don't tar us all with the same brush

I would happily tar and feather all the teenage post count whores on this site.

Some what nasty but would love to watch

[RJM25R]

so u believe that he has bought GM new wings (!!!) and punched them with vents and sold them so cheap?

The brand new vx wings that I bought took 6 weeks to come from germany, they were primed matt black with no holes for indicators or aerial hole.

they're second hand, that's why he's spray-primed them grey to hide the original colour!

[dan16v]

yup gm wing come with no holes, and in a dull black colour. id only ever get gm! not worth wasting money on cheap stuff, always get what you pay for!
funny with the post count! i have been on here for over 5 years and im only over the 1000mark :lol: i post regular also, just dont post crap :lol:

[benji]

my gm wings were ?60 each + P+P and they are black. the wings i have from sel are shit, not tried fitting them yet but i wouldn't want to either

[jamie gsi16v]

this guy only ever uses second hand parts, thats why they have"holes" in and too some people they are dead cheap. at the end of the day baxters been ripped off and caused everybody to argue, lets all give him a round of aplause. :P

[Snowface]

baxter 5.3 posts per day.
dan 16v 1.3 posts per day.

either baxters got a lot of knowledge to share or...

:roll:


then again there are people on here with over 7 a day!

Edit: The leader has 7.8 posts a day!

[scott.parker]

baxter 5.3 posts per day.
dan 16v 1.3 posts per day.

either baxters got a lot of knowledge to share or...

:roll:


then again there are people on here with over 7 a day!

Edit: The leader has 7.8 posts a day!

Bonet looks ok,but why didt you try doing something your self,just buy an old bonet for ?10 and fuck about :roll:

And Epo is the leader with 12.6 a day posts :lol:

[dan16v]

lol nice i contribute an average of 1.3 posts per day :D :lol:

[General Baxter]

right ok then, lets settle this :P

fit the same

but oh wait my new ones fit the same, as the ones i took off!, he has a load of wings in there selothan (spelling) wrapping, with GM stickers on them!

bonnet must be GM ;)

http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/wing3.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/wing2.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/wing1.jpg

[scott.parker]

I remeber reading in the first post when you got this car you wer leaving it standard,not going piss around with it like the last one?? :roll:

[STE Novavanman]

the paints not very shinney on the archs have you bogged them

[General Baxter]

it is std! just need some more cooling as my 1L goes warp speed!

ste follow the colour, the cars in a shadow! if you look on the top of the wing and the bonnet, its shinny due to the suns on it :wink:

[jamie gsi16v]

giant cheese greater alert! :!: :!: :!:

[-=VanMan=-]

They look well

I'll be going to my local catering fabricators to get my vents punched in 8)

[STE Novavanman]

They look well

I'll be going to my local catering fabricators to get my vents punched in 8)

get a body saw and panel beaters and do it yourself

[Matt2107]

I can vouch that pattern parts can come with or without side repeater holes as one of mine has one and the other doesnt.

:P