View Full Version : Building a Corsa C C20XE 1600cc Rally Car
fearless
19-07-05, 09:25 PM
I'm just in the progress of building a Corsa C Tarmac Rally Car with a mate - At the moment he runs an Astra GSI with a Bowyer Developments 260 ish engine and Quaife Dog box/ Proflex etc
The engine has since being rebuilt to a higher kitcar spec - with barrel throttle bodies !!!!
However - A six speed sequential dog box is on order from Holland (about 12 grand !!!!!)
This, with the engine out of the Astra will end up in the Corsa - Running Super1600 bodykit, but with fibreglass wings/bonnet/tailgate/doors
All in all is should be a lightweight flier !!!!
I've already been on the http://www.corsasuper1600.com/ website - and managed to gain access to the build details via a password :D
Right then - here's the update so far !!!
Bought a Corsa C shell with the intention of having a complete weld-in roll cage fitted and all the modified inner arches and suspension pickup points fitted - booked in with Harry Hockley to have that lot done at a cost of over 3 grand !!!!!
But then this ex-works bare shell came up for sale
Last used on the JWRC Rally Turkey 2003
http://img.photobucket.com/albums/v516/fearlessmotorsport/mikeshell_turkey.jpg
Managed to get Carbon Fibre Doors Tailgate and Bonnet with the deal as well !!!! - Should be a real light weight flyer !!!!
http://img.photobucket.com/albums/v516/fearlessmotorsport/Ex_Works_Shell032.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Ex_Works_Shell002.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Ex_Works_Shell003.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Ex_Works_Shell010.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Ex_Works_Shell015.jpg
The challenge now is to make it a rolling shell - ready for the engine transplant
Has anyone any info/contact details/pictures of any corsa C rally cars to help us on our way
We've already been in contact with Ray Mallock Ltd - who built the works cars - but has anyone any more contact
Contacts so far include Rob Palmer (Ran Kriss Meeke for Colin Mcrae) and Chris Birckbeck who also ran a works team - Harry Hockley and Walden Engineering - but as you can guess they want big money !!!
Help !!!!
What I'm after is as much information/pictures on any Corsa C rallycars/Rallycross etc to assist in the build and possible problems/solutions we may come across
Cheers Dave
looks good mate, the roll cage in that is made with it all over but will be a beast when its done :D
ANDYRACER
20-07-05, 11:09 AM
That will be one hell of a car when it is finished. That cage looks quality. And the plans sound spot on.
Dave, have u tried Dave at Magnum Motorsport in St Helens? I know he was making some parts......
Rick
fearless
20-07-05, 08:33 PM
Dave, have u tried Dave at Magnum Motorsport in St Helens? I know he was making some parts......
Rick
Yeh - We supplied him with the original kit that we got !! - for him to make some moulds
i think you should cut the cage out and stick it in the escort van....
sorry, that probably didn't help :roll:
nova---chris
20-07-05, 09:50 PM
be ok with some subs and moniters in there :)
martweaver
21-07-05, 08:35 AM
:o Gulp, looks like a fair project you have on your hands there! I'm sure with your skills Dave - it will be awesome!!
Couldn't you look at some old rally entrant lists & try contacting some of the privateer teams, I bet they would be more helpful than the works boys. I'm sure there were loads of these run privately & still are.
Just an idea! Good luck!
Mart
starkmotorsport
21-07-05, 01:02 PM
Corsa C's are now starting to be used in UK motorsport, Walden are producing a fair amount and Ive helped on a privately built car.
Got two words for you though : Driveshaft Breakers! :lol:
Nice wee cars though, keep us up to date with progress pics :wink:
if i get time to have a look at the new brighton prom rally this week end and there are a few or even one there. i'll get as many pics as pos for you.
my mate is also going over to ireland for a rally he has arranged. i'll ask him to keep an eye out for you too.
you could even pm bigruss.
he might know of some when he rallies.
fearless
21-07-05, 06:48 PM
if i get time to have a look at the new brighton prom rally this week end and there are a few or even one there. i'll get as many pics as pos for you.
I'm servicing for my mates orange astra (the one in the first link !)at the prom on Saturday - Come over and say Hi !!
It may be it's last outing before some of the bits are taken off for the corsa
Dave
fearless
21-07-05, 06:54 PM
Got two words for you though : Driveshaft Breakers! :lol:
**** Breaks out into a sweat ****
????? Why? What engine's have they ran, spec of shafts etc - We've not had any breakages in the astra YET (reaches out and touches wood !!! ) - which is donating its running gear - whats the reason for breakages in the corsa ??
Have you any picture/info on the one you have helped build ?
Cheers
Dave
fearless
21-07-05, 07:43 PM
:o
Couldn't you look at some old rally entrant lists & try contacting some of the privateer teams, I bet they would be more helpful than the works boys. I'm sure there were loads of these run privately & still are.
Mart
Hi Martin
Unfortunatley - Not many of these Ex works Corsa's have made it to Clubman Rallying yet !!! - Just too expensive !!! (Cost over 70K new!!)
Due to the shell being modified to works spec - a lot of the mods only allow works stuff to be fitted ?????? -
Take for example the rear suspension/beam
Standard Corsa C's run a similar setup to a nova - solid rear beam
However the works Corsa's ran independant rear suspension
So our shell has a mountings for the rear beam like this - 3 bolts either side
http://img.photobucket.com/albums/v516/fearlessmotorsport/Ex_Works_Shell025.jpg
And needs to mount this works spec rear beam
http://img.photobucket.com/albums/v516/fearlessmotorsport/rearbeam.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Billing_2005092.jpg
So without modifiying the shell back to original spec (A step backwards in terms of handling) things start getting expensive
eg
B23-E1029 SWING ARM LH ASSY ?1682.06 (complete left hand swing arm assembly including bearings/fixings etc.)
23-E1037\5 SWING ARM LH ?1360.98 (swing arm only)
B23-E1030 SWING ARM RH ASSY ?1682.06
23-E1038\5 SWING ARM RH ?1360.98
B23-E1031 SUBFRAME BEAM INDEP MTG ?674.07 (complete assembly including rollcentre spacers/bolts etc.)
All Plus VAT
!!!
And thats just for the rear beam and 2 swinging arms - doesn't include suspension or brakes !!!!!
Your looking at about 12 grand for the rear suspension/brakes !!!!!
I've managed to contact 2 teams that ran them in the Junior WRC - just a matter of negotiating a deal for some of their spares packages ??????
Cheers for the comments so far - I'll keep you all informed
Dave
starkmotorsport
22-07-05, 12:22 AM
Dave
One "C" Ive seen out competing has broken a short shaft everytime its been out on tarmac. Engine is a redtop with TB's, exact spec is unknown.
As for the one Ive helped with, its sitting in a workshop as the driver has been given a drive in a Escort Cossie, so this "C" is 90% built and just sitting idle. The owner has a library of photos, can ask about getting some, but hes a bit secretive.
Another friend has just recieved one from Walden and promptly blew the engine up on the Jim Clark a few weekends ago. Should be rebuilt for the Manx at the end of the month though.
MARTIN KELSON
29-07-05, 12:47 PM
So this is whot your upto then is it mate.
Thought you were concentrateing on your own little project now?
Might look nice with some little stumpy mirrors!!!!!!!!!!!!!!
Cheers
So this is whot your upto then is it mate.
Thought you were concentrateing on your own little project now?
Might look nice with some little stumpy mirrors!!!!!!!!!!!!!!
Cheers
:lol: :roll:
eerrrmm.... and not forgetting my service Dave!! :roll:
Cheers
Nick
MARTIN KELSON
01-08-05, 02:17 PM
You get some stick dont ya Dave!!
fearless
01-08-05, 06:31 PM
eerrrmm.... and not forgetting my service Dave!! :roll:
Cheers
Nick
Errr - yes I had forgot that one - Saturdays looking a good possibility - speak to you before then !!
Dave
eerrrmm.... and not forgetting my service Dave!! :roll:
Cheers
Nick
Errr - yes I had forgot that one - Saturdays looking a good possibility - speak to you before then !!
Dave
Dave,
No probs mate, just keep me posted!!
Cheers
Nick
fearless
06-12-09, 10:53 AM
**** UPDATE **** (at last :thumb: )
Years have pasted and some progress has been made
The spec of the car has changed somewhat since the original plan of transfering most of the running gear from the Astra Gsi he was running. The original plan of a cheap reshell using the C20XE engine and Dog box and Proflex suspension/AP brakes from the Astra has now turned into a money pit - using new proflex, sequential box, new brakes and a Destroked C20XE into an all steel 1600 screamer :d
The shell is now a rolling shell with a Hockly Motorsport independant rear beam - with the shell modified to allow even more suspension travel front and rear - running on proflex dampers all round
Brakes are Works OPC AP Calipers and 355mm front discs and Alcon rear calipers/disc
A new 6 speed sequential Sadev gearbox and gearlever have been purchased
A dummy engine has been fitted to the box and all mounts and driveshafts fabricated by HHMS
Martin Bowyer (Bowyer Developments) is in the progress of building the destroked C20XE into a 1600cc (steel crank/rods, new pistons, new throttle bodies etc) which expects 220+ bhp on his dyno
So most of the fabrication etc has been done
Just completing the final mods to the shell (RHD conversion) and then it can be painted and assembled :nod:
These are some of the pics I took the other night when we were tinkering
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600001.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600002.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600003.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600005.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600007.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600008.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600009.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600010.jpg
Mods might want to move this thread to the Project section and I will try to keep it updated :)
Dave
fearless
06-12-09, 10:53 AM
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600011.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600013.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600014.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600016.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600018.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600020.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600021.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600024.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Mike_S1600030.jpg
Dave
let_nova
06-12-09, 11:23 AM
stunning mate.
go to
thread tools>move thread.
Looks excellent- sounds expensive!
fearless
06-12-09, 11:41 AM
Cheers let nova - you learn something new everyday
+rep
that rear suspension set up looks the bollacks :thumb:
looking good progress aswell
The Simps
06-12-09, 01:12 PM
Mmmm tasty! That rear suspension setup is cool.
Just hope it hasn't destracted you from your own project!
garethcolley
06-12-09, 04:47 PM
Very nice.
liam944nova
06-12-09, 05:24 PM
that will be cracking car when done :thumb:
Pistol Pete
06-12-09, 05:49 PM
Looks like this will be an awesome build. I look forward to more updates.
Count Vaux Alot
06-12-09, 05:57 PM
that rear suspension set up looks the bollacks :thumb:
looking good progress aswell
well said and i agree
fearless
07-01-10, 09:24 PM
We lost the bonnet vents that we had for the Corsa S1600 Rally car
Does anyone know where to get a pair from
Look like these
http://www.xwmatinos.gr/xwma/images/07/gaz01.jpg
Cheers
Dave
The Simps
07-01-10, 09:28 PM
And I thought it was gonna be an update! :(
Sorry I can't help.
fearless
07-01-10, 09:53 PM
Will try and update with pics soon - I'll take my camera next time I'm in his garage
He wants it finished this year - so just prepping the shell for paint - then its just a matter of throwing all the parts back on it
Spoke to Martin Bowyer last week - just a nudge to remind him we need the engine soon
He's got our dash display unit - so a trip down in a few weeks to pick it up
Dave
The Simps
07-01-10, 10:02 PM
Need some more pics of your project too.....
fearless
19-06-10, 09:24 PM
***** UPDATE *****
Making a little progress on the Corsa.
Finally got round to throwing some paint on the underside, wheel arches and inside - nothing too fancy - just stonechip and white paint where neccesary
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0109-1.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0110.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0112.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0126.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0128.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0129.jpg
The plan is to make it into a rolling shell and then take to the body shop for the outside to be painted
5 year project and its just gettin painted lol Looks sweet thought :thumb:
fearless
19-06-10, 10:06 PM
5 year project and its just gettin painted lol Looks sweet thought :thumb:
Anyone who knows me will know that quick progress for me lol
fearless
19-06-10, 10:12 PM
Since we had finished some aspects of shell prep - We couldn't resist bolting on some shiny bits !!!!
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0116.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0117.jpg
Proflex rear coilovers
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0121.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0124.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0125.jpg
Premier bag tank with carbon covers
fearless
19-06-10, 10:27 PM
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0131.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0134.jpg
Proflex front struts with works OPC AP Calipers/355mm Discs
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0138.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0146.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/SP_A0142.jpg
IRS beam with Alcon rear calipers/discs
Oh - forgot about this little purchase
http://qedmotorsport.co.uk/qed-shop/vauxhall-xe-c20xe/specials/aluminium-engine-block
Now back with Martin Bowyer for the final build after a trip to Millington for the rebore for the special pistons :)
Dave
nom nom nom
Alloy block too, shweet
Very very nice!
fearless
17-10-10, 11:49 PM
A few pictures of the latest progress
Pedal box and a few few brake lines fitted
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep002.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep003.jpg
Front subframe painted and steering rack fitted
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep004.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep006.jpg
Roof vent fitted
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep014.jpg
Kevlar tailgate trial fitted
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep022.jpg
Seat roughly in position
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep013.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep015.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep030.jpg
Dave
fearless
17-10-10, 11:54 PM
Sequential Gear lever mount fabricated to bring lever to optimum position
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep033.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep031.jpg
Brakes/Hubs etc fitted
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep019.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep024.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep025.jpg
Check out the width :thumb:
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep021.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Shell_Prep029.jpg
I'm just in the process of creating a wiring loom at the moment seeing as the corsa C uses Multiplex wiring :doh:- So bining that and using a mixture of Corsa B & C looms as we only need Lights and wipers to function - pictures to follow soon
Dave
Southie
18-10-10, 12:16 AM
:eek: How the hell did I miss this 5 year old thread lol
Looks a proper build Mr France, plenty of nice upgrades I must say, what's happening engine wise with it? Also any completion date or is that a silly question.
Brilliant work regardless and proves that the best things do come to those who wait and wait and wait and yes wait, that little bit more.
fearless
18-10-10, 12:32 AM
Engine is being built as we speak by Martin Bowyer
Will be an Alloy Block C20XE destroke to 1600cc - Steel Crank etc, Throttle bodies - Martin expects around 230bhp on his dyno - reving to over 9000 Rpm
Should be quite entertaining
Hoping to have it up and running by the end of this year
Southie
18-10-10, 12:43 AM
Sounds an expensive bit of kit but sod it your only here once. Is the destroking of a 2.0 a common thing to do these days in a 1600 class?
Keep at it nearly there. :cool:
fearless
18-10-10, 01:03 AM
De-stroking the C20XE Block should produce a stronger 1600 that will hopefully be more reliable and not as highly stressed as a 1600XE version
Not sure of the figures of a 1600 compared to a Destroked 1600 - I don't think its a common mod but Bowyer speaks highly of it
If its not quick enough it will probably end up with a rebore to 2000cc/new pistons and crank - and then wait for the gearbox to blow !!!! :)
Danny s-p
18-10-10, 01:14 AM
this is so cool. good luck
Dude that looks amazing! Got some proper width on her ass...
Any chance of a pic of the wiper motor...
novarally
18-10-10, 10:10 AM
:eek: How the hell did I miss this 5 year old thread lol
I missed this one too, incredible.
Lovely bits of kit the Corsa C tarmac cars.
Dave - if you get fed up waiting on Mr. Bowyer, or need a spare engine, I know where there is a 1600 all-steel destroked C20XE ready to go..........
Give me a shout.
fearless
21-10-10, 08:55 PM
Not much of an update - but prepped the shell ready to throw a bit of paint at it
Masked up and all good to go :)
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaint002.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaint003.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaint004.jpg
fearlless, the corsa b stalks fit the c cloumn, so you can use the full in car loom, and jjust change the light plugs over and extend it where needed.
fearless
21-10-10, 09:10 PM
fearlless, the corsa b stalks fit the c cloumn, so you can use the full in car loom, and jjust change the light plugs over and extend it where needed.
Great minds think alike Rob
Already done that - Used the Corsa B loom from fuse box across the dash - and then used Corsa C loom for lights Front and rear
Stripped out all extra wiring for CDL/speakers/airbag etc - so now have a quite a simple basic loom for Lights and front wiper - not much to go wrong hopefully
Engine loom will be MBE - Dash Display has its own loom with sensors so a hell of a weight saving over the standard loom :thumb:
Dave
fearless
30-10-10, 07:15 PM
Managed to put a bit of colour on it (bright orange if your viewing on a black and white monitor lol)
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside001.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside003.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside008.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside006.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside007.jpg
Threw some filler primer on the front wings and headlight surrounds
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside009.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside010.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside011.jpg
Started to prep the rear bumper
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside012.jpg
Look its the real deal :thumb:
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside015.jpg
Trial fitted the Fibreglass tailgate - fitted the flush latches and fitted the S1600 spoiler
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside028.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside025.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintside032.jpg
Dave
peester
30-10-10, 08:03 PM
cool colour.. cool workshop ; all the ammenities
fearless
12-11-10, 05:31 PM
Not really an update - just remembering the good old days (page 1)
Spotted the old Astra GSI rally car back up for sale again - different colour (used to be orange) - slightly different spec -but still looking good
http://www.pistonheads.com/sales/2206117.htm
Sent the link to my mate who's car it was - His responce "Any way corsa should be faster and look better!!!!!! don't dwell on the past, need to go forward." :thumb:
Dave
tom reid
12-11-10, 07:04 PM
Proper job Dave, loving this thread, hope you don't have to wait too long for the engine, Bowyer is known for his lead times.
5 months to get pistons, but tbf i can get hold of him pretty sharpish now for parts:D
fearless
12-11-10, 07:42 PM
Told Bowyer we need engine by Christmas - he has all the bits and the block is machined - he just needs to throw it together and map it
He's good friends with my mate so I don't think he will let us down
nova_mike
15-11-10, 10:12 PM
one hell of a car this! will be nice to see it in action!
fearless
19-11-10, 08:21 PM
More of the boring bodywork prep for final paint
Rear bumper almost ready for some colour
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintbumpers004.jpg
Front works wide kevlar bumper needs a bit of TLC before repaint and new mesh and lower skirt will be added :thumb:
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintbumpers006.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintbumpers005.jpg
And a couple for Benn - requested Front wiper motor/linkage pictures - Whats he got planned lol
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintbumpers010.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsapaintbumpers011.jpg
Basically a standard RHD Corsa C front wiper motor/linkage but the mounting plate for the motor has had the spot welds drilled out and the plate moved further along the bar due to having to relocate the motor to clear the cage :thumb:
All the linkage bars remained the same - works in theory but yet to power up the motor to test
Dave
Southie
19-11-10, 08:33 PM
It's a beauty, keep going ;)
Sh!t the fooking bed, ive not seen this build thread before but will be keeping an eye on it, some awesome work going on in here and the old astra looks sexy as hell, keep the updates a little more regular though if you can :p
Oh and have another blob of rep too:thumb:
Southie
19-11-10, 08:46 PM
A splash and dash of green from me also Mr Fearless.
A splash and dash of green from me also Mr Fearless.
Ner ner you didnt give him a blob, but i did :p
lol
fearless
19-11-10, 08:52 PM
Cheers boys - Its good to be bolting stuff back on
Got the new bonnet intakes from Germany - very good quality - just need to cut some holes in the kevlar bonnet and bond them on
Thanks for the rep !!!!
Dave
More that welcome bud, ill definately be keeping a close eye on this:thumb:
Southie
19-11-10, 09:02 PM
Ner ner you didnt give him a blob, but i did :p
lol
:(
So what's the deadline now on this Dave and what events/area will you be attending next year, would love to see this in the metal whilst in action.
fearless
19-11-10, 09:40 PM
Engine all paid for with Martin Bowyer - told him we need it by christmas - then we can plumb in radiator and coolant system etc
Will be running Acusump system so need to find a home for that
Still loads to do but have most of the major components - but all the finishing touches can add £££ to the final bill !!!
Expect the car to be finished by early next year - following a trip to Harry Hocklys Motorsport to set up Geometry/suspension hope to a do a track day somewhere to do a shakedown and explore the limits
Rally events will be Tarmac based in UK mainly in the north (Single venues /epynt etc) - along with trip back to Belgium montebourg rallysprint
Can't wait for a drive :)
Dave
Coming along nicely Dave ;)
Nick.
Southie
19-11-10, 10:05 PM
Plans sound cracking, where in the North are you running?
fearless
19-11-10, 10:15 PM
Coming along nicely Dave ;)
Nick.
Cheers Nick
Not ideal painting it in a garage - but for a rally car where we expect some panel damage we feel its acceptable
Quite a few tiny silicon marks if you get up close in the orange paint - whats the best remedy for these - touch in with paint - flat and buff ?
It's difficult to decide whether to repaint for a perfect finish - but in the back of your mind you think you might have a slight 'off' on the next rally and have to paint/re panel it anyway !!!:confused:
To be honest - the finish isnt that bad - using a small smart repair gun - managed to get quite a good shine :thumb:
Once the final paint scheme/ stripes / stickers etc are on the car I don't think it will be that bad
Saw a Ford WRC Stobart Focus with a rear quarter panel riveted on over the original panel - the close up finish was terrible - but the overall car was amazing
If its good enough for the works rally teams - Our home garage work of art shouldn't be that bad :thumb:
Ps - I'm sure i've seen a Anti Silicone paint additive - is it any good - does it work (still using Cellulose Paint !!!)
Dave
fearless
19-11-10, 10:25 PM
Plans sound cracking, where in the North are you running?
Will be the usual single rally venues - North west stages / mamby / croft / Mira / 3 sister (Wigan) / Melbourne Airfield / IOM /Blyton etc
Maybe a trip to ireland to see how the real loonies do it lol
Cheers Nick
Not ideal painting it in a garage - but for a rally car where we expect some panel damage we feel its acceptable
Quite a few tiny silicon marks if you get up close in the orange paint - whats the best remedy for these - touch in with paint - flat and buff ?
It's difficult to decide whether to repaint for a perfect finish - but in the back of your mind you think you might have a slight 'off' on the next rally and have to paint/re panel it anyway !!!:confused:
To be honest - the finish isnt that bad - using a small smart repair gun - managed to get quite a good shine :thumb:
Once the final paint scheme/ stripes / stickers etc are on the car I don't think it will be that bad
Saw a Ford WRC Stobart Focus with a rear quarter panel riveted on over the original panel - the close up finish was terrible - but the overall car was amazing
If its good enough for the works rally teams - Our home garage work of art shouldn't be that bad :thumb:
Ps - I'm sure i've seen a Anti Silicone paint additive - is it any good - does it work (still using Cellulose Paint !!!)
Dave
Hi Dave,
The way I usually remedy silicone is to..... 1. Flat the silicones and the small area around them using 1500/2000 wet/dry 2. Touch them in with activated topcoat. 3. Lastly give it a few days to dry then block off the touch ups until flat with 2000 wet/dry then polish with the machine/cutting compound to bring your finish back to life and with a bit of luck it should be spot on.
Hope the above helps. Ive never used the anti silicone additives so I cant comment on how well they work Im afraid. Im sure the car will look great when finished as you say its a rally car your building not a show winner so function over form at the end of the day. You will have to let us know when the cars at melbourne as thats only a few miles from me so Id like to see the car put through its paces etc.
Nick.
Southie
19-11-10, 10:40 PM
Not too far for me to travel to then Dave, well apart from Ireland lol
Nearer the time get some venue dates up and I'll plan a day or two out for next years calendar.
Edit: Are they still going to be running Melbourne next year, I know they've had a bit of a commotion with the farmer for the last couple of years.
Will be the usual single rally venues - North west stages / mamby / croft / Mira / 3 sister (Wigan) / Melbourne Airfield / IOM /Blyton etc
Maybe a trip to ireland to see how the real loonies do it lol
These are very, very local to me so would love to know dates you intend to be there as id love to see this in action:thumb:
fearless
19-11-10, 10:58 PM
Thanks for the info Nick - will give it a try
Still a long way off hitting the stages yet - but will keep you all informed of when its out
I remember watching kris meeke driving one of these as a works car on the jim clark a few years back, always liked the look of them.
Cracking build cheif :)
forking ace .......subscribed.
dj_wudgey
16-12-10, 03:42 PM
what a awesome piece off kit this is!!!! absolute mental build thread matey!!! loving the cage in the thing! this car is the shizzle!!!!
fearless
13-01-11, 09:09 PM
Not much of an update - too cold to work in the garage lol
But planning a big push in the next few months - Rest of the panels (Doors/Bonnet/Tailgate/Bumperas/Arch's etc) being painted next week
Cut the Kevlar Bonnet last night and fitted the bonnet vents ready for painting :thumb:
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsabonnetvent001.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsabonnetvent002.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsabonnetvent007.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsabonnetvent006.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsabonnetvent009.jpg
Trip to AutoSport show tomorrow will empty the wallet a bit more lol
Dave
peester
13-01-11, 09:32 PM
Perspex over those vents..?
Bit gutted i couldnt go during trade days.. im going sunday.
Reckon there will still be some trade on the sunday..?
Looking good mate, :thumb:
fearless
06-02-11, 06:19 PM
Painted arches, tailgate, bonnet, doors and bumpers along with a few other bits - starting to look a bit more complete now :thumb:
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels007.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels009.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels010.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels011.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels012.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels014.jpg
peester
06-02-11, 06:26 PM
**** the bed :eek:
Looks beautiful mate love how clean it all is subscribed now get it finished! lol
kevster
06-02-11, 06:54 PM
thats the nut's !!!!!! im keeping a eye on this puppy
krobinson
06-02-11, 06:55 PM
Paint finish is epic!
fearless
06-02-11, 07:18 PM
Cheers boys
Paint finish is 'acceptable' for being painted in a garage at home ;)
Expecting to have to do a lot more Painting once it's used in competition !! so don't need a concoarse finish.
Pistol Pete
06-02-11, 07:20 PM
Colour really suits it. As you say though, for a workshop job seems to have come out really well.
Wooo.....10,000 posts go me lol :roll: :d
t45_ste
06-02-11, 07:36 PM
Looking really good, you managed to sort the cell out?
fearless
06-02-11, 07:45 PM
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels016.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels017.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels022.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels028.jpg
And as we left it
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanels027.jpg
Certainly puts a smile on your face when it starts to look more like a car rather than a shell :)
Still a long way to go before the Monteberg rallysprint at the end of April :d
fearless
06-02-11, 07:51 PM
Looking really good, you managed to sort the cell out?
Sent the email to Premier with dimension - no reply yet :( - will chase them up this week
Southie
06-02-11, 07:54 PM
Love this motor, the orange against the white looks brilliant :cool:
What's next then Dave?
fearless
06-02-11, 08:26 PM
Picking up some tinted rear lights this week from breakers
Need to fabricate some arch liners and hoping to get the rear spoiler Carbon wrapped
Next step is to finish off the bespoke wiring loom and try and get some of the electrics working
That colour is ruddy awesome!!
fearless
10-02-11, 09:14 PM
Another few nights work and it's starting to look more like a car, although progress is starting to slow down as it's all the fiddly/time consuming jobs that are left !!
Making and fitting Brake Pipes
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1005.jpg
Feed and Return Teflon lined Aeroquip Fuel lines
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1006.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1007.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1018.jpg
Originally fabricate for a Prodrive WRC Impreza - Brand new, pressure tested and still had FIA 'Funny Fuel' residue in the lines !!!
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1013.jpg
Routing from Tank to Bulkhead fittings
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1011.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1014.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1019.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1025.jpg
MARTIN KELSON
10-02-11, 10:15 PM
You should have learnt a trick or two for when it comes to building that Nova :)
fearless
10-02-11, 11:10 PM
You should have learnt a trick or two for when it comes to building that Nova :)
Just mastering my technique before I am set free on the Nova :thumb:
awsome work, what engine spec are you doing?
fearless
11-02-11, 06:45 PM
Engine is being built as we speak by Martin Bowyer
Will be an Alloy Block C20XE destroke to 1600cc - Steel Crank etc, Throttle bodies - Martin expects around 230bhp on his dyno - reving to over 9000 Rpm
Should be quite entertaining
Promised us the engine by the end of the month :thumb:
Danny s-p
11-02-11, 11:29 PM
wow get better with every update
Nice!
I look forward to seeing the finished result.
i was down at martins yesterday...sure he said he dyno had failed so hes waiting on that to get sorted now iirc. was goign to ask how the build was going as id liked to of seen it.
shells really taking shape now though:D
fearless
13-02-11, 04:51 PM
Fitted a few more panels :
Carbon/Kevlar bonnet - just need to fit mesh to the vents
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1001.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1029.jpg
Painted and fitted headlight surrounds and slam panel
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1026.jpg
Doors built up, polycarb window/sliders fitted
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1037.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1038.jpg
Rear bumber fitted and swapped rear lights for tinted ones :cool:
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1045.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1046.jpg
More pictures later :thumb:
Dave
Car looks fapping awesome. Top work, credit to you Dave :thumb:
Crack on :)
Ive considered putting this kit (and a ZLET) on my C van once I get round to buying a new van lol
Southie
13-02-11, 05:13 PM
Oh it's look good, very good :cool:
I'm back to work tomorrow so you should have an email at some point Dave ;)
fearless
13-02-11, 05:22 PM
Cheers Dave - If you don't mind I'll be posting your Contribution to the project later tonight :)
Southie
13-02-11, 05:28 PM
Cheers Dave - If you don't mind I'll be posting your Contribution to the project later tonight :)
No worries, not one of my best mind lol
MARTIN KELSON
13-02-11, 05:33 PM
You doing all the work Dave?
What do you reacon a build like this will have cost in the end?
Woohoo get this finished so can see the nova :roll::roll:lol
fearless
13-02-11, 06:10 PM
Just helping a mate out Martin - Wednesday night is spent in his garage, he does the odd night when he has spare time - He's built a few rally cars in the past so has a good idea what he's doing !
It's a high spec build so a bit out of my price range - I recon it will have cost in the region of 35-40K when its finally finished
I recon I can blag a few drives when its finished:)
Dave
I recon it will have cost in the region of 35-40K when its finally finished
:eek: :eek: :eek: :eek: :eek:
fearless
13-02-11, 07:05 PM
Couldn't resist throwing the front end on to get an overall look - still needs a lot of adjustment to get panel gaps ok (for a rally car ;) ) and the headlights will probably end up being the facelift type
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1040.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1041.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1047.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1030.jpg
This is how we left it - left with a big smile on our faces
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Corsapanel1043.jpg
And a big thanks to Southie for this Photoshop
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/CORSACFearlessedition3.jpg
Hopefully will end up looking something like this :thumb:
Dave
Southie 2010? Has somebody forgot what year it is?
Corsa is looking awesome, Uber cool.
fearless
13-02-11, 07:34 PM
Southie 2010? Has somebody forgot what year it is?
He must have had the same vision we had last year - and commited his vision to photoshop - great minds think alike lol
Southie
13-02-11, 08:51 PM
Never noticed the year lol
fearless
13-03-11, 09:19 PM
Not much progress to report - Still waiting on the engine - We've moved to the top of Bowyers list http://www.migweb.co.uk/forums/images/smilies/smile.gif
Looks like it's not going to make it to Monteberg Rallysprint (Belgian) - So last sunday we went on a 9 hour roadtrip to Essex (towing a trailer) to look at an 1.6 16V Anglia Rally car to do a bit of drifting and having a bit of a laugh in Belgian instead http://www.migweb.co.uk/forums/images/smilies/smile.gif
Car was OK for a 49 year old car - but need a little work and seats/belts etc - Made a bid but guy wouldn't drop enough so walked away
Looks like we'll be drinking Belgian beer instead http://www.migweb.co.uk/forums/images/smilies/smile.gifhttp://www.migweb.co.uk/forums/images/smilies/smile.gif
fearless
02-05-11, 08:17 PM
Unfortunatly, No Belgium beer this weekend - decided best to spend the long weekend working on the rally car rather than go to Monteberg Rallysprint
So another update on the Corsa S1600 :thumb:
In an attempt to push the progress forward - we have put an entry in to compete in a rally at the Abingdon Car-nival rally on the 12th June - Only 6 weeks away :eek: - with me sat in the Co-Drivers seat - will have to dust off my racesuit/Helmet and loose a bit of weight to get into them lol
Meaning a lot to do in a very little time - hopefully Bowyer will supply the engine sooner rather than later
Anyway a few pictures - some more bits aquired
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash026.jpg
One battery - same spec a redtop varley - quite heavy but better then sat on the start line unable to start the engine
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash022.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash023.jpg
Extinguisher - ready to plumb in
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash013.jpg
A roll of Composite Fibre ready to fabricate arch liners
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash017.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash018.jpg
Passenger Carbon foot tray - drivers side is still in production
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash011.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash012.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash001.jpg
Lots of surplus wiring looms - just need to create one for the Corsa C
Dave
MARTIN KELSON
02-05-11, 08:23 PM
Hope 'Fearless Motorsport' aren't making the carbon drivers footplate.
Looonnnggg wait if they are!! :)
fearless
02-05-11, 09:24 PM
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash003.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash005.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash007.jpg
Fitted the flocked dash
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash009.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash014.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash015.jpg
Then the mamoth task of creating and fitting the wiring harness
Seeing as the Corsa C uses a canbus wiring system - things get rather restricted with modifications to instrumentation and the removal of unneccessary comforts (Airbags/Electric windows/Central locking etc)
The rally car only needs simple lights and wipers - Engine will be taken care of with its own MBE loom, and the aftermarket Dash runs off it's own loom
So we binned the extremely heavy and complex Corsa C loom and went back to basics with a simple modified Corsa B loom, using parts of C loom where appropriate
Relocated and simplified the fuse box - and extended the harness where neccessary
I'm very happy with the results - very light loom and really easy to diagnose faults if they occur
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash019.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash021.jpg
Not much will be needed to fit foot tray
And finally couldn't resist throwing a seat and steering wheel in to make some more brum brum noises
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash027.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Dash028.jpg
Hopefully more updates soon
Dave
http://i790.photobucket.com/albums/yy181/Bazil_2468/cats/a62448c7.jpg
P.S, love the yamaha in the background.
fearless
02-05-11, 09:48 PM
Cheers - the bike's my mates kids - only 12 and already wants something faster :)
kevster
04-05-11, 12:22 PM
loveing the dash !!
fearless
04-05-11, 06:56 PM
Thanks - making a carbon panel for the centre to house switch's, push button start and electric cutout and fire extinguisher etc
Instrument cluster will also mount on a carbon panel
A few more looms need to be made - 1 for electric front screen - 1 for electric steering column and another to power the twin fuel pumps
Tested all the lights and wipers etc - Worked first time :)
Dave
peester
04-05-11, 08:50 PM
it is wow. shifter looks awesome. sequential?
fearless
04-05-11, 09:43 PM
Running a Sadev ST75 6 speed sequential gearbox with a shift lever - will probably end up being paddle shift when we get it all up and running
Dude that looks awesome, love the dash.
I like the use of the B loom and how good its come out.
Done by next week? lol
fearless
04-05-11, 11:01 PM
I wish it would be finished next week
But with only 6 weeks before the rally we've entered - I think it will be a miracle if we make it
Really hope Martin gets the engine finished soon - Need to get an exhaust system fabricated at Tony Law Exhausts in Leeds - needs to go to Hockleys to have all the Geometry setup , still needs an MOT and MSA Logbook
And could do to have a blast at a test venue before the Rally in 6 weeks
Keep your fingers crossed
16v Nova Kev
04-05-11, 11:05 PM
very tasty looks cleaner and more well finnished than alot of road cars.
fearless
08-06-11, 07:53 PM
Had to cancel the entry for the rally at weekend - still waiting on the engine from Bowyer - although he did actually ring us this week - so hopefully have an engine update soon http://www.migweb.co.uk/forums/images/smilies/smile.gif
Even when we get the engine fitted - still have to book into Tony Law exhausts for the system and then a trip to Hockly's to get the Geometry/suspension set up - so realistically the rally on the 12th was unlikely to have happened anyway - just needed something to aim for and hopefully push Bowyer on a bit
The inner carbon panels, drivers foot tray and mirrors are being fabricated at the moment - so should have them in the next week or so
I'll try and get some updated photo's together soon
Dave
calibra-keith
08-06-11, 10:36 PM
great build thread, looked at it a few times but what orange is it i couldn't find that bit, im wanting to do my nova in orange.
fearless
17-06-11, 10:13 PM
In an attempt to save weight we scrapped the original heater/air distribtion housing as it's very heavy - to be replace by this little heater/blower
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Foot_tray005.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Foot_tray002.jpg
It's tiny and will supply warm air to the Heated screen we have on order - best to be safe than sorry - It no good having all this fancy equipement if you cant see where your going !!!
Hydraulic handbrake plumbed in - Just need to extend the lever to be in easy reach
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Foot_tray007.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Foot_tray008.jpg
Drivers carbon fibre foot tray in positition - just need a liittle tweeking to fit snug
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Foot_tray013.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/Foot_tray015.jpg
Dave
Is there no need for a cable hand brake?
Looks good, love the tiny heater.
fearless
17-06-11, 10:26 PM
Unfortunately for a legal MOT and to pass Rally scrutineering we need to have a cable handbrake :(
So I am pleased to announce - We are using a Nova handbrake lever :) - linked to cables
We are mounting this on the transmission tunnel within reach of the driver - but will only be used to satisfy legal requirements
Danny s-p
17-06-11, 10:26 PM
reacting for the tissue box again lovely build
Those mini heaters are awesome! Ive got one for my Corsa :thumb: they work really well Ive found!
fearless
17-06-11, 10:30 PM
Yeh - I heard good reviews for them - Will probably route fresh air to it - as recirculating moist air within the cabin area is not as efficient
Yeh - I heard good reviews for them - Will probably route fresh air to it - as recirculating moist air within the cabin area is not as efficient
Definetly dont recirc moist air, itll insight condensation when the outside air temperature is lower then cabin temp (so pretty much all the time).
You could take an air inlet from the driver/codriver door jamb. Thats how I routed mine on a 106/205 & a Corsa B.
had one of these little heaters lyin around a while ago dont no where ti got to now got it from a 1.5ton mini digger with intensions of using it in some thing had a little rad pipes and a 2 speed blower built in
NOV4_SPORT
18-06-11, 11:18 AM
looking good buddy, i really like this.
iain
pikey1986
02-12-11, 04:33 PM
damn you bazil, i thought it was an update :mad: lol
This is one of those threads that went missing in the update, so I just had to bump it lol
Danny s-p
03-12-11, 01:15 AM
yes dam you bazil oww and hi long time no speak
novarally
21-12-11, 09:57 AM
Dave.
Could I ask what shade of orange paint you've used please?
fearless
21-12-11, 08:02 PM
The orange paint is just from local paint supplier - nothing fancy - not even a well known manufacturer
Described as Base Orange - just the orange they use for mixing - says 433 on the tin !!!!
A nice cheap solid orange - readly available for those frequent repaint moments following a rally !!!
Is this another option for your Nova Colin ?
novarally
22-12-11, 09:52 AM
The orange paint is just from local paint supplier - nothing fancy - not even a well known manufacturer
Described as Base Orange - just the orange they use for mixing - says 433 on the tin !!!!
A nice cheap solid orange - readly available for those frequent repaint moments following a rally !!!
Is this another option for your Nova Colin ?
Thanks.
Orange has always been a favourite of mine, but I was reluctant to use it on the Nova as one of my Mini rivals has an orange paintjob.
Who knows, one minute I want one colour, the next something completely different.........but I will have to decide soon, as you will see on my 'Project' thread, my Nova is back home and in primer.
michael harbour
22-12-11, 08:56 PM
does it need to have a fire wall for the fuel tank?
fearless
22-12-11, 09:01 PM
Has a carbon cover that fits over the bag tank so no need for a fire wall :)
any updates? This is a mental build, love it!!!
ExTrEmeOc
25-12-11, 04:53 PM
Nice build, i like the independent rear axle :cool:
This thread needs new pics and an update
Pretty pretty please :)
fearless
29-06-12, 10:00 PM
Not much of an update - just a few more pictures to keep you all happy
Progress has almost come to a halt - lack of an engine is holding us up :(
Our other project (Chevette) however is taking shape :) - will update that thread after weekend after we have fitted the engine :)
The Corsa is a little further on than these pictures show - so I will take some upto date pictures and post soon
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows005.jpg
Front Proflex canisters secured in place
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows029.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows026.jpg
Along with the rears
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows025.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows024.jpg
Handbrake lever extended by Ally Tig Welding in an extension piece to bring lever into easy reach - all repainted now :)
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows009.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows010.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows012.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows018.jpg
http://img.photobucket.com/albums/v516/fearlessmotorsport/Windows019.jpg
Tinted polycarb fitted
Corsa's under a sheet at the moment while we press on with the Chevette
Dave
Southie
29-06-12, 10:25 PM
Bloody hell Dave I forgot you had this, are you saving Vauxhalls in your unit just to make them collectors items lol
Must admit this will be awesome once built... whats the crack with the engine though???
Also when did you last blow the cobwebs of that Nova of yours then lol
Did the engine for this ever get built? Would love to see it finished :)
peester
27-12-12, 03:09 PM
its still at engine builders.. afaik :-s
BRoadGhost
27-12-12, 03:46 PM
http://hostthenpost.org/uploads/56864ccfe0222a8f341d5eb64d9d8664.jpg
fearless
29-12-12, 06:13 PM
We are still waiting for you know what !!!
We've been busy with the chevette and I will try and update both threads in the next few days
Dave
Dave
did you have to do much modification to the the dash to fit round the roll cage. I am about to start building a c for road rallying but want to have the cage run behind the dash and didn't know if you had problems with this.
Great car by the way
James
fearless
01-04-13, 02:13 PM
Dash took a bit of time to fit - lots of fitting and taking out to trim a bit more off
Only had to trim round the 'A' pillar of the cage as we had removed all the heater box to save weight and replaced with a small light weight fan/heater
It's very tight to get back in but we don't plan on taking it out again :)
cheers for that would the heater not have fitted then?
fearless
01-04-13, 04:25 PM
Factory heater box did fit but very big and bulky so binned it for a light weight one
fair enough. how u getting on with the car?? where u planning on using it next
fearless
01-04-13, 04:51 PM
Been busy building the chevette rally car so the corsas on hold until the engine appears
cool u should give me a call when you come to plum it in I work at a company that does plumbing etc www.competitionsupplies.com
fearless
01-04-13, 05:06 PM
If only I'd have known about you earlier - done most of the brake lines etc - chevette almost finished and got most of the stuff to finish the Corsa
oh well theres always next time. we also service lifeline fire extinguishers.
u got any pics of the chevette. couldn't find a build on here
fearless
01-04-13, 06:09 PM
oh well theres always next time. we also service lifeline fire extinguishers.
u got any pics of the chevette. couldn't find a build on here
http://www.migweb.co.uk/forums/projects-restorations/497777-chevette-hsr-c20xe-rally-car.html
I see you have a tilton clutch on the chevette engine thats good were the main people for them as well :-)
fearless
01-04-13, 06:23 PM
You might just become my best friend :)
its all on the shelf all you have to do is call
Kev Turbo
03-12-14, 12:01 AM
Any update on this one?
fearless
08-01-19, 07:53 PM
Ladies and Gentlemen, boys and girls, may I proudly present to you, the long awaited.....
Engine for the Corsa S1600 rally car has arrived
Mapped and ready to fit, so watch out for 2 idiots in an Orange Corsa S1600 approaching rapidly in your rear view mirror very soon
fearless
08-01-19, 08:21 PM
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/C60CD658-8C98-40A4-8E77-A4BE16760A35_zpsfdaimlym.jpeg (http://smg.photobucket.com/user/fearlessmotorsport/media/Corsa%20S1600%20Rally%20Car/C60CD658-8C98-40A4-8E77-A4BE16760A35_zpsfdaimlym.jpeg.html)
fearless
08-01-19, 08:26 PM
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/96D58482-4B69-4064-B6EC-FF75CCEACDEF_zpsxsyednqb.jpeg (http://smg.photobucket.com/user/fearlessmotorsport/media/Corsa%20S1600%20Rally%20Car/96D58482-4B69-4064-B6EC-FF75CCEACDEF_zpsxsyednqb.jpeg.html)
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/E553DDCC-E169-45B4-BD24-D431D3EE270E_zpsx7zsbar4.jpeg (http://smg.photobucket.com/user/fearlessmotorsport/media/Corsa%20S1600%20Rally%20Car/E553DDCC-E169-45B4-BD24-D431D3EE270E_zpsx7zsbar4.jpeg.html)
http://img.photobucket.com/albums/v516/fearlessmotorsport/Corsa%20S1600%20Rally%20Car/AB3BFDA6-AD63-42AD-92CF-3B239A35F2FA_zpsir4b8bpq.jpeg (http://smg.photobucket.com/user/fearlessmotorsport/media/Corsa%20S1600%20Rally%20Car/AB3BFDA6-AD63-42AD-92CF-3B239A35F2FA_zpsir4b8bpq.jpeg.html)
That looks mental! What manifold is that?
fearless
08-01-19, 08:46 PM
Bespoke manifold from Simpson race exhausts - it’s a work of art
Alloy block?, be interested to see how you get on with it looks lovely btw
fearless
08-01-19, 09:13 PM
Well spotted - had to go alloy block as steel would have rusted away with the amount of time it took
millworm
09-01-19, 12:11 AM
Beautiful bit of kit, look forward to seeing that in the car!
So it was on the dyno...?
How did she do??
fearless
09-01-19, 12:28 PM
223 bhp - not bad for a 1.6 !! Sounded like a chainsaw - ha ha
8valve-craig
09-01-19, 01:58 PM
Lovely, You must be very pleased.
How different is the power delivery to a modified 1600 small block?
CorsaBBoomer
09-01-19, 02:13 PM
You got the chainsaw color right (Stihl) lol
Very nice numbers after more then 4 years
boffer8
09-01-19, 03:06 PM
Would love to see the graph to show the torque and power delivery vs RPM, will show character it has compared to a 16xe build
fearless
09-01-19, 06:09 PM
Unfortunately I didn’t get to see it run on the dyno and I don’t have a power graph, so will just have to wait until it’s fitted and run up the road, but mated to the sadev sequential box it should be quick enough
boffer8
10-01-19, 02:57 PM
I'm sure anything with a motor built like that will fly along!
More out of curiosity of engines than anything else... Not saying it wouldn't be a weapon!
Lovely, You must be very pleased.
How different is the power delivery to a modified 1600 small block?
Hi Craig,
the first swindon S1600 had 214bhp.
Evo 1 218bhp
last evo2 224bhp.
We build on an engine with the basic from the s1600 and the first run on a dyno was 248bhp. I hope, we can fit it next year in my s1600 with some more bhp :-)
@ Dave, and engine fitted? :-)
Cheers
Marcel
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.