PDA

View Full Version : 1.2+ twin 40's


Mike.
14-07-05, 08:44 PM
will it work

and what would i have to do too make it work
any ideas?
Snowface
14-07-05, 08:56 PM
it would work. And work a lot better also.

you need a 1.3 Twin 40 inlet manifold
28mm chokes.
The rest you would need setting up on a r/r.
Mike.
14-07-05, 10:15 PM
cheers mate :wink:

helped alot
Stuart
15-07-05, 11:02 AM
to make them a little mroe fun, add a silly cam, head work, and huge compression.

much more entertaining ;o)
Mike.
15-07-05, 06:08 PM
lol, was thinking of a new cam aswell, i just want to get the t40s then go from there, now that i know what i need i shall get it done :wink:
ednovasr2
15-07-05, 11:49 PM
it would work. And work a lot better also.

you need a 1.3 Twin 40 inlet manifold
28mm chokes.
The rest you would need setting up on a r/r.

What if your running a 1.3 lump same 28mm chokes?who does the inlets case know seems to sell them not even on ebay!

Bet new ones are cost of all the parts needed for a 2.0 16v conversion including the engine!

ED :|
Adam
16-07-05, 12:03 AM
it would work. And work a lot better also.

you need a 1.3 Twin 40 inlet manifold
28mm chokes.
The rest you would need setting up on a r/r.

What if your running a 1.3 lump same 28mm chokes?who does the inlets case know seems to sell them not even on ebay!

Bet new ones are cost of all the parts needed for a 2.0 16v conversion including the engine!

ED :|
IIRC nova sports 40s came with 28mm chokes.
You can get the inlet manifold kit here:-
http://www.tuning.co.uk/vauxshop/en-gb/dept_630.html
Mike.
16-07-05, 07:43 AM
that inlet manifold kit is very good value for money imo
ednovasr2
17-07-05, 11:56 PM
Cheers & thank you muchly :

Long Live The Nova


And the name says it all!
Wish peeps would learn to weld and stop scraping/ breaking up nova's!
Mine cost me about 5k in seven years including mos'd cost of car, re-sprays the lot many new cars lose that in a year!

ED
sUpEr_1200
18-07-05, 11:51 AM
Cheers & thank you muchly :

Long Live The Nova


And the name says it all!
Wish peeps would learn to weld and stop scraping/ breaking up nova's!
Mine cost me about 5k in seven years including mos'd cost of car, re-sprays the lot many new cars lose that in a year!

ED

i wish i could weld mate too!!

i have got a nova in my garden with a suspension turrret that needs some attention from the welder!

apart from that!!