dash spraying

[christlee05]

Iv got a mk2 nova and i want to spray the parts of the dash which go over the speedo,light switch and air vents. i Can get them of exept for the 1 where you turn on the lights it says in the haynes manual that you have to get a small scewdriver and poke it in to release the securing tag but i cant seem to be able to do this please help.

[-tucny-]

its a bit of a pain to get off that one.

a screw driver is a bit straight because it needs to be round a little at the end. something small and flat with a say 45 degree bend should be better. imagine a small flat head screw driver with a tight bend and the end, well thats what you need.

[General Baxter]

easy!

take the clocks out, put your hand around the corner pull the loom plug off, push the 'lugs' in and pull out :lol:

[christlee05]

Iv done it know used a little round screwdriver you get out the crackers from christmas just getting sprayed know.

[-tucny-]

easy!

take the clocks out, put your hand around the corner pull the loom plug off, push the 'lugs' in and pull out :lol:

iv said it before and il say it again, it'll only work with spindley twig like fingers!!!

i tried it that way and got my hand stuck! :x

[General Baxter]

Lol i have monkey hands, the mega large,