Changing Final Drive on F13CR

[krobinson]

I've managed to get myself a F13CR box, and i've got a 4.18 FD from a F10 box in the garage.

To change the final drive, do i just take out the crown nut, and remove the end plate (13mm bolts) and slide the cluster out? Will the 4.18 from the F10 fit the F13? (if not, i have a F13WR with a 4.18 i can remove and refit)

Keith

[Stuart]

FD guide in tech guides ;)

i have pics now for most of the job so ill ad them later

[krobinson]

Get those pics up prettttty please :)

Keith

[Stuart]

just had a look, actually the pics arent that usefull lol sorry.

once you get the cluster out you will understand the guide better.
from the sound of it you have a 2nd box anyway so that will give you the gist of what to do.

[krobinson]

Finally the Gasket kit arrived for the F13 Gearbox today, so it was time to build it back together.

New Pinion Cog from the Final drive is the small cog at the top!
http://img.photobucket.com/albums/v37/keithrobinson/fd1.jpg

New Crown wheel
http://img.photobucket.com/albums/v37/keithrobinson/fd3.jpg

Inside the gearbox casing, when the cluster is removed!
http://img.photobucket.com/albums/v37/keithrobinson/fd2.jpg

Closeup of the Cluster
http://img.photobucket.com/albums/v37/keithrobinson/fd4.jpg

Keith

[Stuart]

lmao, you actually bothered to get a gasket set!!! i never bother, jsuta good dose of silly-cone does the job :)

does the guide make more sense now youve pulled the cluster?