View Full Version : Changing Final Drive on F13CR
krobinson
03-07-05, 06:49 PM
I've managed to get myself a F13CR box, and i've got a 4.18 FD from a F10 box in the garage.
To change the final drive, do i just take out the crown nut, and remove the end plate (13mm bolts) and slide the cluster out? Will the 4.18 from the F10 fit the F13? (if not, i have a F13WR with a 4.18 i can remove and refit)
Keith
FD guide in tech guides ;)
i have pics now for most of the job so ill ad them later
krobinson
03-07-05, 07:48 PM
Get those pics up prettttty please :)
Keith
just had a look, actually the pics arent that usefull lol sorry.
once you get the cluster out you will understand the guide better.
from the sound of it you have a 2nd box anyway so that will give you the gist of what to do.
krobinson
07-07-05, 09:15 PM
Finally the Gasket kit arrived for the F13 Gearbox today, so it was time to build it back together.
New Pinion Cog from the Final drive is the small cog at the top!
http://img.photobucket.com/albums/v37/keithrobinson/fd1.jpg
New Crown wheel
http://img.photobucket.com/albums/v37/keithrobinson/fd3.jpg
Inside the gearbox casing, when the cluster is removed!
http://img.photobucket.com/albums/v37/keithrobinson/fd2.jpg
Closeup of the Cluster
http://img.photobucket.com/albums/v37/keithrobinson/fd4.jpg
Keith
lmao, you actually bothered to get a gasket set!!! i never bother, jsuta good dose of silly-cone does the job :)
does the guide make more sense now youve pulled the cluster?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.