Help needed PLEASE

[Harpo_8]

Hi i want to upgrade my sterio system (speakers/sound)at the mo ive got:

-Kenwood head unit 4x40w
-Kenwood 6 CD changer
-2x120w 13" Sony speakers
-2x180w 6x9 sony 3way speakers
-2xstandard ROVA:'> front speakers (god knows what the outage is

at the moment i have NOT got the 6x9 connected but the sound at the mo is just not good enuff! i want to connect the 6x9 but am unsure how to do so as there is only 2x2 output (front&rear left&right).

I did think to run the front Rova:'> speakers and the 120w rear speakers from the front out wires and the 6x9 off the Rear. so the i could push the max power out of the 6x9's would this work??

or can you suggest a better option... i really dont have a clue??? :-/

Pllllleeeeeeaaaassseeeee!!!

[Stuart]

connect them to the head units powerd outputs they will run fine off that
13cm to front
6x9's to the rear

and do what ever you want with the rover ones (ps dont diss rovers :p lol)

BEng (hons) just isnt enough, i need a Msc too!

[Harpo_8]

Ive spoken to Rova and they are gunna change over the speakers for free when i take it in for its 1st service, if i provide them with a replacement pair. im think ill get another set of 120w sony (?40) and stick them in.

how will i get all 6 speakers running??

[kpharrop]

by using a two channel amp

"Kwicksave at night, cruisers delight"

[Stuart]

a 2x50W amp for 6x9's and the headunit outputs for the front sets

BEng (hons) just isnt enough, i need a Msc too!