PDA

View Full Version : Helps Cam/fuel Problem



Mastermeekon
27-05-05, 10:16 PM
Same saga
The valve timing is correct for the new cam, now with it having a higher lift, will it require more fuel? if so can anyone tell me hoe to tune it up atleast half decently, as it is it runs but there is no where near the power it should have and the injectors are clicking quite loudly Any thoughts NOva GTE E16SE, tryed a boost valve, just complicated things so I took it off and put the standard regulater back on, Any hints, tip, hearsays will be greatly appreciated.

Many thanks.

david dixon
28-05-05, 12:27 PM
what cam profile?

Mastermeekon
28-05-05, 01:05 PM
Its a 272deg 12.01mm vale lift 7.11mm cam lift timing 26-66 open 66-26 close, full lift 110deg, power band 2500-6000rev

david dixon
28-05-05, 02:26 PM
it will need to be altered but to be honest you best off getting it rolling roaded cos you'll need your timing setting aswell.