xe into a nova coolont hoses problem

[trossnova]

i have put the late dizyless xe engine into my nova but am stuck on where all the coolent hoses go can any one send me a diagram or exsplain it many thanks chris

[Dar]

No worries.

The top rad hose goes to the thermostat housing. You can use the standard Nova hose. Thats the easy one.
Look at the back of the engine and you will see two outlets from a plastic hose attached to the engine. The left one (if your facing the Nova) goes to the left heater matrix pipe. The right one goes to the header tank.
The other end of the plastic hose goes to the bottom of the rad. A standard Nova hose will do.
The outlet from the head that faces to the right (towards the header tank) goes to the other heater matrix pipe.
The small pipe that comes off of the inlet manifold goes to the header tank and should be T'ed in to the small pipe that comes off the top of the rad.

Hope this helps
Dar :mrgreen: