TB or not TB lol

[scott.parker]

Well affter fighting off a hangover i draged my ass out of bed and whent down to "berts" dave marshal of pvg,i bought his old SBD tb's and MBE managment
while there i also whent out in lee of the pvg's xe on tb's and oh babay what noise and so fast,i carnt wait :D

http://img183.echo.cx/img183/9038/picture777small9su.jpg (http://www.imageshack.us)
:D

And a really smart fuel regulater :wink:

http://img98.echo.cx/img98/2783/picture7807qx.jpg (http://www.imageshack.us)

Just need new cams and pockted pistons.

Scott

[srs1]

looking good there matey.

[karl Rowntree]

Nice one Scott, you aernt messing around now! You going all out stripped track car?

I best get my arse into gear and keep up with you lot :twisted:

Karl

[scott.parker]

Done mate

http://img283.echo.cx/img283/235/picture7744py.jpg
Not sure if you know i fitted the front coilovers and have solid mounts in it also now mate,just need to get buckets cage diff lighten fly and a few other bits :lol:

Scott

[karl Rowntree]

Buckets, i was going to say you will be needing some seats in there! That is pretty damn stripped now. What spec seats/ cage etc are you going for? If i can offer one word of advice, get the best you can first time as i seem to be changing mine every five minutes.

Karl

[scott.parker]

umm im not sure yet mate,i was tempted by dave to buy a set of monicos,ther bran new in plastic and carboard still,he only wanted ?200 but i though,humm i will wait as i think i want something very high on the leg support but also quite comfy as i think it will get very harsh iwth the new mounts and that.

Scott

[karl Rowntree]

do you mean cobra monico's Scott. If you do mate dont bother, i really didnt like mine on track. Hold out and get some better quality seats, you really do get what you pay for.

Karl

[nathan.]

Nice one scott. should be ace when done.
When you fitting them?
are you coming to curborough on tuesday, theres only 6 cars going. loads of track time.

Nath

[scott.parker]

Yeah im going to mate,i would like to find a way of testing a load of them,but i have no idea if there is anywhere near me that sells a big range..

still un sure on whether or not i want some with the side head reestraints or not?

Dave also found a nice exhaust manifold to match th TB's,think i will have to get it :D
and he's sorting me a nuber of a place where they make custom cages to fit sunroof GSi's 8)

Scott

[scott.parker]

Nice one scott. should be ace when done.
When you fitting them?
are you coming to curborough on tuesday, theres only 6 cars going. loads of track time.

Nath

Nah mate would of done but i have just got some more work and it starts on monday.

Dont think they will be on and maped for pv,though they will for llandow,also hope to have the diff :wink:

Scott

[Dar]

Nice one Scott :D
Have you got some ARP rod bolts? If not they would be a good idea. Better safe than sorry.

[scott.parker]

Nice one Scott :D
Have you got some ARP rod bolts? If not they would be a good idea. Better safe than sorry.

Already in there mate,whent in on the first rebuild along with the helex padle clutch.

Scott

[Dar]

Good stuff :P I should have guessed you had it all sorted. Its going to be a flying machine :twisted:

[scott.parker]

Good stuff :P I should have guessed you had it all sorted. Its going to be a flying machine :twisted:

Need to rais my friging front coilovers tho,as i bought them 2nd hand and dont have the C spaner,they catch on the arch slightly over bumps so i have themn set hard to try help :lol:

Pluss the camber is mega silly :roll: i see new top mounts on the way,along with tyres or els the only place i will be flying is in the hedge :lol: affter going in this guy lee's(bottlethrody) on pvg i must say toyos are the way for me! :D


Scott

[Philsutton]

mmmm, you'll love them. I cant be bothered to keep up with you all so im levaing mine as it is an im going to surprise you all with a different car

[scott.parker]

mmmm, you'll love them. I cant be bothered to keep up with you all so im levaing mine as it is an im going to surprise you all with a different car

Whats up phil you all bark and no bite :lol:

Scott

[Philsutton]

i didnt say i wouldnt batter you, just im not going to spend anymore on it.

[peester]

...while there i also whent out in lee of the pvg's xe on tb's and oh babay what noise and so fast,i carnt wait :D

Scott

lee hearsay?? red gte? 16xe aint it..?

[scott.parker]

No not that lee,lol his name on PVG site is bottlethrody,its a Blue c20xe nova on QED set up
http://img.photobucket.com/albums/v287/Bottlethroddy/IMAG0003.jpg

Though it now has a GSi front on.


Scott

[Alex]

hmm the 1st july 2088. Not bad if it was taken then. The car would be almost 100 years old!

[scott.parker]

hmm the 1st july 2088. Not bad if it was taken then. The car would be almost 100 years old!

lmao,yeah best tell him to go back in time and get me one. :lol:

[ANDYRACER]

I knew it would be throttle bodies you were after. :lol:

[benji]

nice. if your coming on tuesday i will bring my spanners and adjust them for you if you want.

[scott.parker]

nice. if your coming on tuesday i will bring my spanners and adjust them for you if you want.

Nah i have more work lined up mate,so im starting there monday now,and dont think the TB's will be on for a few weeks as need a few bits to get them running right etc,and then mapping sesh.

Scott

[Adam Moran]

Nice one Scott, you wont be disapointed ;-) Gets expensive when you start talking pistons, rods, cams, manifolds ect ect lol I wont tell you how much i've spent already :o

[Ian]

No not that lee,lol his name on PVG site is bottlethrody,its a Blue c20xe nova on QED set up
http://img.photobucket.com/albums/v287/Bottlethroddy/IMAG0003.jpg

Though it now has a GSi front on.


Scott

looks a touch familiar lol

[scott.parker]

Nice one Scott, you wont be disapointed ;-) Gets expensive when you start talking pistons, rods, cams, manifolds ect ect lol I wont tell you how much i've spent already :o

Well my total amount,in all spent on the car has gone up in to five digit figures now,all i will say is i will try and stop before i get to the amount karl and bret spent,though it is never ending :lol:


And yeah now you say ian it dose look like yours did,though hes ditch the bumper over a standard gsi one now.

Scott

[NovaNeil]

Nice one Scott!!!! About time you got some of them, Fair play. Ditch the MBE though :lol: DTA all the way :D

Are the bodies going on without cams first? or are you doing it all at once?

And whats this about raising the ride height??? :o Are you mad? haha

Neil

[Riggy]

very very nice scottie lad :lol: :lol:

[Dpnova]

nice one dude, you finaly will have some compotition for the pug van.....fair play to you mate