PDA

View Full Version : iv got holes that needs pipes over help



General Baxter
16-05-05, 11:25 AM
:roll: its a garret T2 if that helps

http://www.streetrace.co.uk/forum/attachment.php?attachmentid=3179
http://www.streetrace.co.uk/forum/attachment.php?attachmentid=3180

1-
2-
3- oil (is it in or out)?
4-
5- to the downpipe
6- to the carb or intercooler
7- to manifold
8- to filter
9-
10-

General Baxter
16-05-05, 04:44 PM
anybody :roll:

Adam
16-05-05, 07:04 PM
Try finding an R5 site if there is one
and ask on there.

nathan.
16-05-05, 07:28 PM
1/2 - go to an solenoid to control boost pressure. may well work off the inlet manifold

4 - unsure! can't see it very well

9 - oil

10 - can't see very well

m.d.
16-05-05, 07:37 PM
9 is an oil return to the sump. its allways the larger one as there should be no pressure there, its just literally a drain. thats why many terbo installs smoke at first as they have backed up oil pressure from the sump. make sure your return to the sump is above the oil level
10 is a coolant pipe for water cooling but you wont want to do this as it can be worse than leaving it uncooled