PDA

View Full Version : WEBER CARB HELP!!!!


boredbloke
10-05-05, 06:47 PM
Help!

I'm thick! i think... lol

anyway to the point,

Just have my carb on but I don't know how to get the throttle cable onto the carb theres no space for it??? I think somethings missing....?

here a couple of pics

side one...
http://img.photobucket.com/albums/v636/bwareofblade/2005_0511carbs0003.jpg

other side...
http://img.photobucket.com/albums/v636/bwareofblade/2005_0511carbs0002.jpg

and i've also got this little piece with no home.....

http://img.photobucket.com/albums/v636/bwareofblade/2005_0511carbs0004.jpg

please help!!!
dan-hipgrave
10-05-05, 07:21 PM
you've got the same pic for both sides mate :P

That little bit not attached is a holder for the choke cable IIRC

The other side not shown is the side that the throttle cable attaches to i think, sorry mate but i cant remember exactly without a pic
boredbloke
10-05-05, 07:43 PM
I knew that :roll:

Now edited

thas what i thought but i didn't wana cock it up lol!!

cheers dude
NovaloadedAgain
10-05-05, 08:23 PM
But when I spoke to you earlier you said it was on the car didnt ya? Lol. :roll:

I havent been able to find the accelerator cable bracket yet but I will! from what I can remember that bolts onto the adaptor plate for the inlet manifold.
boredbloke
10-05-05, 08:35 PM
it was on the car but i couldn't drive it home without the accelerator workin.... duh!!!

shoulda used a bit of string through the window that would have been an experience!!!
Ste_Nova
10-05-05, 08:35 PM
bits are missing
mikey14sr
10-05-05, 08:38 PM
the adapter plate in the photos is the wrong way round, yuo do have the accellerator cable bracket, but its at the wrong end of the carb! That other bracket is indeed for the choke outer cable, this should help,
http://img.photobucket.com/albums/v689/mickyd79/47_1_b.jpg
NovaloadedAgain
10-05-05, 08:41 PM
lmao! Ok sorry mate-I was half right! so you need to try www.webcon.co.uk
Search around on there they used to sell parts for the 32/34 when I had one on mine mate!

Oh....Dont try the string accelerator cable either! :o Crazy mofo! Thats the type of thing you'd do! lol :lol:
boredbloke
10-05-05, 08:42 PM
right thats understandable!!

i thought it was for the fuel line,

but how does the cable attach to the carb?

am i missing something?
NovaloadedAgain
10-05-05, 08:44 PM
You havent bolted the bronze looking accelerator cable arm onto the carb its in the picture on the K&N! :lol: You still need the adaptor plate accelerator cable holder, But will drive at least without it.
boredbloke
10-05-05, 08:50 PM
right okay the accelator sits in the slot but that still don't explain how it attaches to the arm on the carb?

can somebody scribble on one of my pics to show me where i connect it??

Love you all!!! or will do if ya solve me problem!!
mikey14sr
10-05-05, 09:18 PM
The piece which hold the accellerator cable is missing, here marked in red, the nipple on the cable sits in the bit marked in blue.
http://img.photobucket.com/albums/v689/mickyd79/P0510_211118.jpg
This piece is bolted to the spindle marked in yellow here,
http://img.photobucket.com/albums/v689/mickyd79/2005_0511carbs00021.jpg
hope this helps a bit more!

I could post you this piece and a set of fitting instructions if you'd like, as the pic is of my spare carb.
boredbloke
10-05-05, 09:30 PM
Your a genius!
mikey14sr
10-05-05, 09:33 PM
http://img.photobucket.com/albums/v689/mickyd79/genius.gif
boredbloke
10-05-05, 09:35 PM
ooo one last thing can i use the same throttle cable?

or do i need another?
mikey14sr
10-05-05, 09:56 PM
If it has a small barrel shape at the end like on a push-bike's brake cable then yes, if it has one of those ball and cup type things you'll need a cable.
boredbloke
10-05-05, 10:03 PM
o ffs!!!!!

u got a spare one of them by any cance cos i think it's the ball n cup although i'm not sure in all honesty
mikey14sr
10-05-05, 10:07 PM
unfortunateley not, check scrappys for 1.3's fitted with 2e3 carbs if yours doesn't match, you should be able to get one for a five finger discount :wink:

or use a solder-less nipple from a bike shop.
dan-hipgrave
10-05-05, 10:08 PM
you can get round it without changing cables mate, mine had a ball on the end and i just chopped it off, and the metal cable that was attached to it just screwed into place..
boredbloke
10-05-05, 10:10 PM
ooo maybe mine will be okay then i have a 1.3 with the 2e3 on it!

I like that discount thou!

wouldn't be the first time i've recieved one from a scrappy!

cheers U guys u make me :D

lol!!