PDA

View Full Version : Fuel gauge not working....



ogginz
11-04-05, 02:20 PM
It was working fine untill the other day wken it showed the tank as empty. Does anyone know what the problem could be? And yes, I do have fuel in there...
Cheers, Olly

DISCO GSI
11-04-05, 02:30 PM
IT SOUNDS LIKE THE SENDER UNIT ON THE BOTTOM OF THE TANK THEY AVE A BALL THAT FLOATS ON THE TOP LEVEL AND DEPENDING WHAT LEVEL IT SITS AT IT SENDS A SIGNAL TO THE GAUGE! THE SENSORS WEAR OUT AND DONT CONTACT PROPERLY USUALY AT THE BOTTOM FIRST ! I THINK THERE MEGA MONEY THOUGH BUT SOME KIND SOLE ON HERE MIGHT HAVE ONE IF YOU ASK NICELY

Chris
11-04-05, 03:51 PM
http://www.virtualienmarkt.de/pics/bmgshift.jpg

I would personally check the connections first, then remove the sender unit to see if it is stuck

Chris

DISCO GSI
11-04-05, 04:00 PM
YEAH ON THE SENDER (UNDER THE TANK) IT HAS THE CONNECTORS AND THEY ARE QUITE EXPOSED AND GET COVERED IN SH?T AND ROT OFF!

ogginz
11-04-05, 05:12 PM
Cheers guys, I will go have a look. I let sum1 drive my car and they reversed over a traffic sign! Maybe it pulled the wires out or sumthin!

DISCO GSI
11-04-05, 05:22 PM
hope ive been of some help ! 8)