Fitting 1.4MPi Engine.

[byd1380]

I have recently got a 1.4 MPi engine from a corsa, complete with loom ECU, inlet manifold etc. I want to fit it to my nova, currently running a carbed engine. The car is for autotesing and doesn't have much of a wiring loom, ie start stops etc. Anyone any idea what's involved or what the wires in the connection block in the loom are?

Any info would be great.

Cheers

Ivan

[justnovas]

Hello
you will need to run a 3bar fuel system. the corsa loom will wire up.
there sould be one plug with all the wires you need.
Are you running a altnater??

[byd1380]

I had to make the wiring loom for the car, so don't have a plug I need to know what each wire does. I am running an Altenator, headlights, wiper but that's it. Would I need to get a fuel pump then aswell.

Cheers

Ivan

[justnovas]

To run the alt you will need vee belt alt and bottom pully.
Wireing:-
Red = live feed
Black = ing feed
red/blue = fuel pump output
thin blue/red = cars speed senser
blue = temp senser

tell me which wire I will try and help.

[Aragorn]

green is tacho and brown-blue is management light

u will want both of those connected up (u can connect the management light to the brown/yellow that normally goes to the choke switch