Nova wiring loom diagram

[nova---chris]

Im after a diagram what will identify the different coloured wires in the loom that runs to the clocks in a nova. Im due to start wiring in my own dash now but need a rough colour coded wiring diagram so i can pick the wires quicker and easier.
I could use the haynes as a last resort but its a ball ache!
I did once have a wiring diagram of novadudes website but that seems to have closed a while back!!

If anyone can help me please pm me or send me a email at chrisuk22@blueyonder.co.uk

[Dan]

Cant help you there, but congratulations on choosing the right forum http://xrtwo.creativesell.com/forums/images/smiles/nerner.gif

[nova---chris]

shat it monkey man! Get back to planet of the apes you! :lol:

[CP]

:lol:

[burgo]

because im so nice ill sort one out for you tonight when im bored and put it up tomoz

[nova---chris]

cheers burgo. email me the link if you can mate!
much apreciated. save me a lot of time.

Much more helpfull than the ugly ape man! :P

[m.d.]

put it up here too as itd be really handy for me when i make my own dials in the future. 8)

[whitty_nova_1300sr]

can you please post as it would be very handy 2 have( i can host it so ppl can down load it)

[Rob77]

Hope this helps!

http://img.photobucket.com/albums/v483/Rob77/wire_colours.jpg

Rob.

[whitty_nova_1300sr]

the pic dont come up m8

[Aragorn]

what you need to realise is that some of those telltales are negative switched and others are 12v switched

tahts why u need the full wiring diagram

also remember to spec the alternator telltale properly - same wattage as original bulb - or you'll end up with no charging as it uses that bulb to excite the windings

the rest u could use LED's or something?

[Rob77]

:o Is showing on my screen!

Bugger.

Try again:

http://img.photobucket.com/albums/v483/Rob77/wire_colours.jpg

Hope this works!

[nova---chris]

i have a simlar diagram. tbh alot of them are single wire.
As for the 12v switch ect it would be nice for a full diagram but this one has enough info for what i need. :)

cheers peeps.
I think that came from nova dudes webpage . heres a link to the pdf for it

http://www.tws.serveftp.net/novaland/howto/digidash.pdf

[Aragorn]

u will need to know wether each bulb is ground or 12v earthed

example:

LH indicator repeater: black-white - ground earthed
main beam warning light - white ground earthed
oil pressure warning light - blue-green - 12v earthed
alternator warning light - blue-white - 12v earthed

connect those to the wrong earth and they aint going to work at the very least, might even short things out

[Stuart]

chris i think all your "telltales" are +12V for the dash. unless i wrote on the wire label otherwise.

any probs gis a shout.