What sort of exhaust system?

[b34ney]

Alright people - just wondering what sort of exhaust systems do u all have on ur novas, if yous go provide pictures or comments would be well apreciatted

at the min ive a 3inch janspeed back box off a corsa.. which aint much note off her at all.. and it hangs down abit.. mountin doesnt help put it up... also theres a blow out on the pipe after the manifold i think.. and Im not sure if that would pass m.o.t so going to go buy a full system, because in time id be doing it anyways - but in need of one now... so ideas and comments welcome

cheers beaney :D

[krobinson]

I'm running a magnex GSI system, tailpipe changed by powerflow. But as discussed its requires a little work to mate up with an SPI manifold.

Keith

[epo]

my old nova was a magnex system made custom
both sielencers were removed and dtm letter box tail pipe was fitted then one on the other side
http://img.photobucket.com/albums/v24/epo_sri/Picture_016.jpg

[ANDYRACER]

Sorry i havent any pics but i used to run a ashley full system with a Jp custom 4" back box and that was sweet.

[Rick Draper]

3" JP custom made full stainless steel system from the turbo back, 4" outwardly rolled back box all hand made.

[Chris]

^^^^ agreed, but a smaller system for me (thanks Rick)

[krobinson]

He's looking a good off the shelve system guys, suggestions?

Keith

[SKoob]

Sportex GTE system with 3inch outwardly rolled exit 8) on the yellow nova, 4inch inwardly rolled piper back box on the blue 1.2 8)

[ANDYRACER]

Sportex and Ashley exhausts systems are good cheap mild steel exhausts.

[Jack]

I had a peco bb2 back box on mine - i know, i know :roll: - but to be honest it sounded really nice, and didn't "fart" or sound hollow like a lof them do.

My friend has a cat back Magnex with 4" tail on his GTi6 and that sounds terrible! Its ok on tickover but all through the rev range it just sounds hollow, like someone farting down a plastic water pipe lol....

[Chris]

I am hoping mine will sound quiet deep

[Ricks]

ive got a peco bb2 and to be honest i think its the best exhaust for a nova.nice sounding exhaust not to loud not to quiet. :lol:

[5_door owner]

http://www.novaload.net/images/car_images/1796big4.jpg

heres my zorst (its in the spare bedroom at the moment, waiting for me to buy a nova to put it on) its a;


Powerflow custom straight through stainless steel exhaust system with two Rage carbon fibre back boxes and 4in flame burnt titanium tip tailpipes mounted either side of number plate

:D , was a bastid coming home from Al's (london-manchester) with it poking out the front window and me under neath it holding it secure lol (i also got the skirts and rear bumper :D )

[smithy87]

I do have a better picture somewhere, but this is my Sportex 3". Great sound on idling and acceleration, great value for money!

8)

http://www.novaload.net/images/car_images/2075big8.jpg

[hendrix]

I got a Janspeed 3" back box and *i think* stainless from the manifold, never really had a look. It does sound really deep but at revs under 2k some ppl say it sounds like a diesel :roll:

[Matt2107]

So really there isnt one exhaust that stands out from the rest as everyone likes whatevers fitted to there car.

I was gonna ask the same question but that other bloke beat me to it.

[NickWalliams]

You can get 3 different Nova gsi engines for example, get 1 piper full system exhaust and fit it to each of the engines in turn and I gaurantee it will sound different every time!

And that goes for all engines and exhausts!

when I chose mine I looked at price style etc.

[Matt2107]

Going very slightly off topic......

I've just removed this from my SR

http://img.photobucket.com/albums/v315/Matt2107/DSCN0370Move.jpg

It's a powerflow back box with a Scorpion Imola 4" outwardly rolled tip. To my amazement I have a receipt for ?160 (fitted) for this.

[SRlew]

ashley, there just wicked they sound nice on idle and at high revs, cheap too.

[epo]

i want peco bb2 twin for the golf but am going to paint it so doesnt look like bb2

[ANDYRACER]

My bro used to have a big bore 4 on his 1.2 and it sounded quite nice for a cheap exhaust.

[skud52]

ive got a 2 1/4 stainless GSi system modified to fit the valver down pipe and a pretty small back box, it sounds ok and looks nice and subtle

http://img.photobucket.com/albums/v482/skud52/IMAG0010.jpg

http://img.photobucket.com/albums/v482/skud52/Image006.jpg

[Ste L]

i got a full magnex system, with a powerflow de-cat...
sounds nice, not very loud though, buts thats they way i like it