Webers 32/34

[boredbloke]

I'm sure this has bin posted before but What do i need to fit the 32/34 webers?

I currently have a 1.3L, the only thing i know i need is the inlet manifold off of a 1.3sr but isn't my engine the same?

does this mean i already have the correct manifold?

[Cassie-Nova]

From what i can make out i think you need the 1.3 Inlet Manifold, Webber 32/34 Carb, adapter plate so that the 32/34 can bolt onto the manifold and possibly a breather adapter?

Not 100% on all of that though! :)

[Jack]

adapter plate so that the 32/34 can bolt onto the manifold
and yes Kyle it does have the adapter plate... :wink:

[burgo]

yes mate your engine is just the same as the sr one so your inlet manifold is fine, so other than that you need the carb and adaptr plate

p.s. i happen to have one kicking about :wink:

[boredbloke]

yes mate your engine is just the same as the sr one so your inlet manifold is fine, so other than that you need the carb and adaptr plate

p.s. i happen to have one kicking about :wink:

looks like theres no need burgo razorjack seems to have it sorted!

Will it just bolt on the considering my engine is 100% standard?

[burgo]

yes mate your engine is just the same as the sr one so your inlet manifold is fine, so other than that you need the carb and adaptr plate

p.s. i happen to have one kicking about :wink:

looks like theres no need burgo razorjack seems to have it sorted!

Will it just bolt on the considering my engine is 100% standard?
not gonna tell you :P lol

na it should do mate you may have to play around with the throttle linkage and maybe autochoke, shouldn't be to hard though

[boredbloke]

Yeah baby!! finally I've want these for ages now!

Cheers Razorjack and Mr burgo!

[Cassie-Nova]

What type of air filter will fit onto a webber 32/34? 1.4SR K&N?

[burgo]

i think most people use a ram air one although i do beleave you can get a k&n which fits it

[johnny27]

i'm going to use my K&N from my 1300 twinchoke 2e3. Two of the mountings line up okay, but the third dose'nt, but it seems to be tight enough ne how on the carb. Oh and about your manifold, it will fit as long as it has the two ports like the sr one on the top of the manifold.

[General Baxter]

ram air looks better

'photo slagg' tonight ;)

http://www.streetrace.co.uk/forum/attachment.php?attachmentid=2935

[alistairolsen]

can some one post up some close ups of the throttle cable clamp, and the one for the choke cable? Ive got the carb, Im making the plate, but the other bits I have no idea what to do about but im bloody sure im not paying for them!!

[Snowface]

http://img.photobucket.com/albums/v642/Snowface-85/imag0011Medium.jpg

1.2 cable at Top
1.3sr/1.4sr cable in middle
1.2 choke cable at bottom.

http://img.photobucket.com/albums/v642/Snowface-85/imag0016Medium.jpg

[alistairolsen]

Cheers mate, But I meant the clamps holding the ends?? They are usually on the plate the carb is bolted to?? Does the end of the 1400 sr throttle cable fit straight onto the new carb?