View Full Version : V6 Brakes with Allesio 2's
I tried my V6 Brake setup today but my Allesio's catch on the calliper.
What size spacers do I need to correct this?
Are there different types of V6 Callipers that dont need spacers?
Thanks
Paul
krobinson
05-03-05, 07:36 PM
Mine dont rub, however are about 1/2 1mm from the spokes.
Keith
Aragorn
06-03-05, 01:31 AM
take grinder to the caliper :)
mine dont touch....
have a tiny gap,but theres still a gap
and as said above take the grinder and slim them down a bit
ANDYRACER
06-03-05, 03:28 PM
Thats quite worrying coz i was going to have cav gsi wheels with v6 brakes and i was told they wouldnt catch. :o
Wish I had known before I needed to get the grinder out, as they are all painted and shiny now. :(
krobinson
06-03-05, 09:18 PM
I really dont understand why they are touching mate? They should just about clear, everyone else with allesios and v6 brakes have no trouble!
Keith
Nah, mine caught too.
Need to remove a tiny bit from the bottom of the caliper.
My 2L brakes rubbed too on my allessios! Its due to th espoke design.
Mine cleared but only just, can barely get a piece of paper between calliper and spoke. Strange how some peoples catch and some don't though!
Aragorn
07-03-05, 02:30 PM
some folk will have used different disks n pads and there are 2 different calipers
vectra 288x25 and cav 284x24
prolly find one will clear and one wont
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.