View Full Version : ** Putting 1.3 into 1.0L ? Advice needed
Straight swap or not?
can I use the 1.0L shafts with the 1300 gearbox?
anything else I should know?
what about ignition side of things...?
General Baxter
18-02-05, 02:11 PM
theres something about the engine mount as well.
not much help sorry
The 1.0L has a different engine mount, i think near the front.
It has to be removed/modified to fit a 1.3 engine in. I think only the 1.0L engine has the different mount.
cant you use the 1300 ones thens as they didnt alter the chassis then did they?much easier
The Engine mount is the same, the only thing you need to change is the bracket which goes from the Front Engine mount to the engine. You will need one from either a 1.2 or 1.3.
You will also need a 1.3 gearbox as the 1.0 gearbox will not fit onto a 1.3.
You can use the shafts as they are the same, you will also need all the other bits like, wiring harness, coil, radiator etc.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.