View Full Version : Taking Seats out?
*^Nicola^*
15-02-05, 12:04 PM
Hiya,
I have a 3 door Nova which has been parked on my drive since November :oops: due to changing the front end to MkII - anyhow, the passenger seat has gone mouldy!!!! :cry: :cry:
So, is it an easy job to get the seats out to clean them in the house rather than struggle with them in the car? Or shall I just leave them where they are? Another reason I want to take them out - the drivers seat doesn't seem to 'slide' backwards and forwards properly :x so I thought I could fix that too.
Thanking you all :D
Nicola
Philsutton
15-02-05, 12:10 PM
you have 2 or maybe 4 13mm bolts depending which model it is at the front on the floor hold the seat in. Take them out it just slides out.
*^Nicola^*
15-02-05, 12:24 PM
Thanks Phil,
So I need a smallish spanner?
Philsutton
15-02-05, 12:27 PM
yep a 13mm spanner, 13mm socket or moles either will get them out
*^Nicola^*
15-02-05, 12:36 PM
Ok Thanks Phil :) Will see if I can find a spanner of that size. Moles are harder to come by where I live :P
http://img.photobucket.com/albums/v712/Nicola001/moleBig.jpg
[/img]
Philsutton
15-02-05, 12:42 PM
i meant mole grips, i dont think the furry ones will help much lol
*^Nicola^*
15-02-05, 12:43 PM
hehe 8)
General Baxter
15-02-05, 12:45 PM
lol classic from a Newbie :lol:
Ok Thanks Phil :) Will see if I can find a spanner of that size. Moles are harder to come by where I live :P
http://img.photobucket.com/albums/v712/Nicola001/moleBig.jpg
[/img]
lol stole my idea! :lol:
N00bs making google image posts already... what is the world coming to :lol:
scott.parker
15-02-05, 01:24 PM
:lol:
I though it was mouldgrips anyway?
Scott
*^Nicola^*
15-02-05, 01:38 PM
Well I've just been out with the spanners and I can't find where the hell the nuts are :o :? I can see the runner things and a nut where the seatbelt thing goes in - but I don't think thats it. Where abouts is it? Should I have the seats tilted forward, is it at the front of the runner or the back?
Sorry :oops:
Matt2107
15-02-05, 01:41 PM
The bolts should be located under the carpet at the front of the seat.
There should be a loose flap of carpet under the seat. If you carefully fold it forward you should be able to see the bolts.
Then once the bolts are out its just a case of sliding the seats backwards off the runners. Sometimes they can be a little hard to get out the runners. Also they're quite heavy so be prepared.
*^Nicola^*
15-02-05, 01:56 PM
Aarrgghhhh, I found the four bolts but I can't undo them! :oops:
But your back into it Nic... Come on.
Nic, Out of interest do you know Jo who used to have the red SRI?
*^Nicola^*
15-02-05, 03:55 PM
I can't get them off no way. I'm sure the drivers side ones are rusted on :lol:
Your Just waiting for one of the lads To say "Where u at Nic, I'll come and sort it"
*^Nicola^*
15-02-05, 04:03 PM
ha ha no I'm not! When my better half comes home from work I'll ask him to do it :lol:
*^Nicola^*
15-02-05, 04:18 PM
I can't get them off! They are rusted on :(
http://img.photobucket.com/albums/v712/Nicola001/rten93l.jpg
Philsutton
15-02-05, 04:21 PM
those bolts arent even on that tight lol, god help you if you ever attempt anything where you might encounter a trust rusty bolt
scott.parker
15-02-05, 04:26 PM
those bolts arent even on that tight lol, god help you if you ever attempt anything where you might encounter a trust rusty bolt
My god dam front bumper that was on the 205 wheni parked it in a garden,that had rusted on bolts! i gave up and let my mate fit who was spraying the wing.. :lol:
Scott
scott.parker
16-02-05, 02:04 AM
i hate rusty bolt holes.
You meant rusty bullet holes!..you love them mate :lol:
i usually Snap the buggers then cry, then get the drill out and make them cry.
mwha ha ha
Philsutton
16-02-05, 01:45 PM
the drill is for women lol, i get the 9 inch grinder out and take half the car off at the same time.
id move this but dont know if technical or muppet :roll: :P
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.