removing a front bumper (mk2) and rear lights

[doug_sri]

Have had a quick look on how to remove a bumper but couldnt find anything. I removed my mk1 bumper but going to remove a mk2 bumper tomorrow night, is there just 4 bolts holding the bumper on? Also can you get access to these without jacking up the car? What tools do i need?
Also is it just a screw driver needed to remove the rear lights, it is in my nova but in mine there aint anything to screw the bottom of the light to?
any help would be great, thanks

[dan-hipgrave]

Going off the top of my head - front bumper is 6 bolts - all in the wheelarches and all can be undone without jacking the car up providing its not slammed or got mahooosive alloys

For the rear lights i think it was a couple of 8mm bolts that are revealed after removing the bulb holder..

Hope this helps you mate :wink:

[Philsutton]

Rear lights you have 3 8mm bolts, very easy to get out. You have 4 13mm bolts on the inner wing holding it on, turn your wheel full lock on way an you should see them. After that you should have a 10mm on either side on the outter wing holding it on with a bracket

[dan-hipgrave]

Cool thought i was right :D