View Full Version : fitting a gsi spoiler
1400_sri
22-01-05, 09:01 PM
just bought one, and i now how to put it on, its just is there any easy way of drilling the holes for the bolts, because ive heard that people have wrecked their tailgates
Any help would be appreciated
measure it up and where the point that you need to drill is put a little bit of masking tape sp that the drill bit doesnt wnader and scratch the paint :D
NovaBen
22-01-05, 09:53 PM
or just centre punch wherethe hole has gotta go!!! :D
just make sure u drill the holes at the right angle
or ull end up with the inside holes in the wrong place
mate of mine done it and made a right ar*e of it
yea fitting the spoiler is tricky if you've never done it just make sure to drill slowly
-tucny-
01-02-05, 09:55 PM
if your drilling from the inside of the tailgate out, with the boot still on the car then remove the boot seal so your drill doesnt chew it!
Cassie-Nova
01-02-05, 10:36 PM
Best to drill from the inside out then?!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.