Locking Wheel Nuts

[ChrisGTE]

I want to take my wheel nuts off but I cant because there is fuckin locking wheel nuts on there do u know how i can get them off without the key the nut is a circle and in it is 3 small holes ive tried for ages to get it off but it wont budge any one know how ?

[Aragorn]

locking wheel nut remover with a reverse thread inside it

or if u can find one a gator grip socket

[Mike]

or do wot the pikeys do? hammer and chisel the ends off's. then grind/file the stub into a slot shape and remove with a rachet/flat headed bit. :|

(this is worst case senario btw) :wink:

[ChrisGTE]

The smallest one is slightly too big i tried for ages to get it off but i cant i think i will try and do the pikey thing lol

[w_wall_2001]

when it happened to me 1 brayed a 17mm impact socket over it and used a ratchet to remove it

[epo]

when it happened to me 1 brayed a 17mm impact socket over it and used a ratchet to remove it

just what i was going to say except it was 19mm i used

[Riggy]

or take it to a garage and get them to do it

[Matt2107]

take it to a garage and get them to weld a piece of bar onto the locking nut and then they can apply more leverage.