PDA

View Full Version : Injection system on 1600


Paul
14-01-05, 04:48 PM
I am building a 1600t40.

The engine is from a 91 J - plate Gsi.

Will I need any engine plugs etc off of it to make it run?

Or is it exactly the same a my old SR on carbs?

Thanks

Paul
MC
14-01-05, 07:18 PM
You can run it just as your SR with the SR ignition etc, you might just have to plug up the EGR valve hole.

MC
Snowface
14-01-05, 11:09 PM
sr ignition won't fit the head and camshaft will it?
MC
15-01-05, 09:25 AM
Why not?

Think you'll find it will.

Are you going to use an aftermarket cam?

MC
Snowface
15-01-05, 01:31 PM
thought the dizzy drive on the gsi cam is different to the sr?

if you use an aftermarket one then it will work i think.
Paul
15-01-05, 05:28 PM
I will be using a piper 285 cam.

Paul
david dixon
15-01-05, 05:32 PM
just use a 1.2 black capped distributer and coil, iv done it that way before!
MC
15-01-05, 06:19 PM
I will repeat ;Use the Sr ignition.

MC
Paul
15-01-05, 07:33 PM
Ok,

Is the EGR hole in the back of the cylinder head inbetween the two middle inlet's?

Paul
nathan.
15-01-05, 07:37 PM
yes it is in between the inlet ports, just tread the hole and put a bolt in it with a copper washer.