View Full Version : THe interior of car
Hi i have a nova 1.4 Sr H8 the grey plastic in the interior I want it blue what is the best way to do it? Paint .. Or get some of that film stuff over it? thanks
get some glasses, then tint the lenses blue, then everything will be blue :D
just use normal paint ? or somthign loike hammerite? or spray? :S<<<<<<,thick
Acrylic paints are supposed to be quite good as they can flex a bit. I used some Foliatec stuff to paint my door cards, comes in a spray and its good stuff - but you gotta make suer you clean the surfaces properly first and give a couple of coats or it can scratch off!
Novadex
14-01-05, 06:37 PM
get some Blue interia spray paint from Halford for around ?15, take all the plastic out, Prime it then paint it!!! Cant fail! look great (Not elephant behind grey) :eggface:
ive already done this
alls i dod was remove the parts i want blue
rub them down
primer them 3 coats
paint them 3 coats
laquer 3 coats
and robs your fathers brother
never had any probs not chipping of paint ect
thats just bog standard halford primer, peugeot royal blue and laquer
or get a blue dash and at least it will be factory looking still :D
or get a blue dash and at least it will be factory looking still :D
...Antibes?
Matt2107
15-01-05, 10:42 AM
Make sure you use plastic primer though as it needs to flex
markbound
15-01-05, 04:57 PM
I sprayed mine blue it looks good but if your not care full it will flake off
Make sure you use plastic primer though as it needs to flex
i just used normal primer and never had a problem
Philsutton
15-01-05, 07:03 PM
mine came with a blue dash, it was a luxe +
or u could get a black GSi dash.
for ultimate cool 8) tho, get ur dash proffesionally "flocked" (like rally cars) sumwhere like West Wales rally spare's or A1 rally spares should be able to do it for you.
Matt2107
17-01-05, 09:51 AM
Make sure you use plastic primer though as it needs to flex
i just used normal primer and never had a problem
Thats coz your dodgy as f*ck
:lol:
Make sure you use plastic primer though as it needs to flex
i just used normal primer and never had a problem
Thats coz your dodgy as f*ck
:lol:
lol point taken :lol:
but it did work fine :wink:
just used some accrylic primer 3 coats of 3 coats of some blue accrylic paint just painted the bit what covers the speedo ash tray door handle covers and the 2 side vents and the little knobs for the heating .. then i ran out of paint :( n forgot to buy laquer :\ but i tried chipping and it aint coming off so looks like job is a gud un
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.