PDA

View Full Version : Antenna Reception



EHoulton
13-12-04, 07:47 PM
I've got a zender electric antenna and for some reason, when my amp in on, the reception will be very weak, almost no stations could be heard, if i switch off the amp, it works fine. I checked all the wiring and everything seems ok.

Any comments on what could be the problem?

smithy87
14-12-04, 11:53 AM
Interference?

Always keep anything to do with power away from anything to do with signal/reception as they interfere quite badly dependant on what your running through it.

Might be wrong though......

epo
14-12-04, 12:47 PM
Interference?

Always keep anything to do with power away from anything to do with signal/reception as they interfere quite badly dependant on what your running through it.

Might be wrong though......

id say you were right mate

EHoulton
14-12-04, 02:26 PM
i did connect then separetely therefore this should not be the problem. I heard i can connect a relay to the feed from the head unit and connect the amp & antenna through the relay. Is this correct?

epo
14-12-04, 10:29 PM
we mean if your running sound\antener cables down the same side as power cables