Exhaust Manifold

[Ste L]

Would a 4 into 1 Tubular exhaust manifold for GTE/GSi fit a Nova SRi??
i've got a sportex de-cat pipe on it

Cheers in advance
Steve

[a11ova]

affraid not, the heads on the 1.4 is different to the 1.6 so the ports wont match the manifold properly 8)

[Ste L]

its an sri not an sr, the heads basically the same as a gsi...

its got an mpi head

[a11ova]

ahhhhhhhhh, should do then, should be ok where the manifold joins your de-cat. chuck it on and find out 8)

[Ste L]

not got it, if i did have it i would of tried it lol

been told that i need a gte/gsi exhaust, but im sure i don't.

Cheers anyway :)


Steve

[Aragorn]

all 8v exhaust ports are the same

and further to that the SRi and GTE have the same downpipe and manifold shape so are totally interchangeable

sr have different shape but u can still fit a GTE system on an SR if u wish as long as u use all of it

[Ste L]

thats what i thought, cheers for clarifying it :)

Steve

[sTuDeNt]

Would 4 to 1 GTE/GSi manifold fit 1.2 engine?

Sorry for haijack!

[Ste L]

with a gte/gsi exhaust i would of thought so

[sTuDeNt]

Cheers mate!

[DrivingSpanner]

all 8v exhaust ports are the same



no they arnt all the same

[Philsutton]

all 8v exhaust ports are the same

the novas ones are, sure about the 1lt though. Well i always thought so

[DrivingSpanner]

all 8v exhaust ports are the same

the novas ones are, sure about the 1lt though. Well i always thought so

the 1 litre ports are completly different, siemesed!!! the shape it the same on the others i think (On the exhaust side) but the dimentions are different i thought? might be wrong on that, deffo different on the inlet side tho...


matt

[Philsutton]

ah that'll be it then, not really studied a 1lt at all. Never had the need to, not going to lose an sleep over the matter either lol

[DrivingSpanner]

ah that'll be it then, , not going to lose an sleep over the matter either lol

:lol: cant say i blame you on that :lol:

[Ste_Nova]

it has lamba sensor.....

so it will need an sri/late gsi one

or will need a normal 4-1 modding

have a look at mine at the meet tonight, i've welded in a lamba boss where the 4-1 meet is

[Snowface]

another question.......

will a GTE (pre-cat) Manifold-Middle Section and middle silencer fit to a 1.2 back box?

I.e. are GTE/1.2/1.3 back box's interchangable?

on the epc i think they have different part numbers but.....

[Ste_Nova]

yup all standard backboxes are interchangable.... but mk1 ones will catch on mk2 bumpers

[Snowface]

right. thanks.
I'm asking this because i'm thinking of getting a Lexmaul Manifold and they only do em for GTE/GSI.

So i'd need a new middle section, but i can keep my back box which is cool.
cheers.

[Aragorn]

to clarify all the OHC small block vaux engines have the same exhaust ports

the 1.0 isnt even a crossflow engine and the exhaust manifold is on the wrong side - would have to be a pretty thick person who tried to fit a ohc exhaust manifold onto one of those engines :roll:

[DrivingSpanner]

hey peeps do exist, and they might not ahve a clue what thing look like under the bonnet still if they tried they be a bit :oops: :oops: :oops:

[Aragorn]

the downpipe sticking out the front of the car could be interesting :lol: :lol: :lol: