Turbo-nutters rolling road results

[Jonlem]

Here are the graphs for my 2l 16v nova with a 50 shot of gas, the other 3 are from my mates phase 3 LET nova!
http://img.photobucket.com/albums/v306/Jatec/DSCF0614.jpg
http://img.photobucket.com/albums/v306/Jatec/DSCF0611.jpg
http://img.photobucket.com/albums/v306/Jatec/DSCF0610.jpg
Any comments ?

[Jonlem]

http://img.photobucket.com/albums/v306/Jatec/martin4.jpg
http://img.photobucket.com/albums/v306/Jatec/martin2.jpg
http://img.photobucket.com/albums/v306/Jatec/martin1.jpg

that should work!

[Chris]

some pics dont work because the swear filter is blocking part of the URL out

Chris

[Mike]

a smidge under 200bhp @ the wheels!! ur obviosly doin somthing rite!
was that the nova (200bhp)???

[Philsutton]

looking at the graph i would image it gets massive wheel spin when the power kicks in

[Chris]

a smidge under 200bhp @ the wheels!! ur obviosly doin somthing rite!
was that the nova (200bhp)???

An XE with N2O

Chris

[Jonlem]

The first 3 graphs are of my 16v on gas and the last 3 are the turbo nova.

You'll have to explain which one your on about!

Both wheelspin badly but they glued the tires to stop this,

Check out the upcoming video on www.turbo-nutters.co.uk

Regards

James

[Jonlem]

yes that is 200bhp at the wheels on gas :) and only 50bhp, we tried a 75bhp jet but I think it melted something so gonna stick another engine in tomorrow :) and run 100bhp gas

[Mike]

ahh, is see now.

one car with 199bhp, and the othe turbo with 251!!! the second set of pics ddnt load earlies. sorry mate

[Jonlem]

The turbo nova ran 251bhp@the wheels

[Snowface]

turbo looks like 299bhp @ flywheel.
XE looks like 230bhp at fly.
sweet.

why does it say in ur sig u drive a phase 3 LET? Thought it was ur mates.

[Jonlem]

I had a phase 3 let, broke it up and sold the engine and bits. The reyland brakes are on mymates one that made 300bhp though. He is The Creator on Mig

My old spec was,

Fully rebuilt LET,EDS intercooler, Mocal oil cooler, new Mahle pistons, z20let headgasket, xe inlet cam, phase 3,lightened xe flywheel and Helix 4 Paddle, The car was fully stripped out and had 2 buckets and I had it nearly bounce the limiter at 7500k in 5th, mental bit of kit, but the xe a lot cheaper to mess around with gas on.

Pic :)

http://img.photobucket.com/albums/v306/Jatec/Sweet.jpg

[-Bruce-]

thoses figures are very impressive for the let.

but your just a standard xe with nos yeh?

as phil says im sure its wheelspin central lol :lol:

bruce

[Jonlem]

Only mod is a group N ecu to help with the ignition, not really sure its necasary but the engine made 171bhp 2 years ago and made that today off the gas so I'm well chuffed

[Jonlem]

Only mod is a group N ecu to help with the ignition, not really sure its necasary but the engine made 171bhp 2 years ago and made that today off the gas so I'm well chuffed.

The engine may possibly have some cams fitted but I didn't pay any attention to them when I rebuilt the top end but thats a lot of grunt for a chipped xe so it wouldn't suprise me

[peester]

jesus h christ.. power beyond belief. no messin' here...

[a11ova]

some good figures there chaps, well done!! Bet ur well chuffed. Hoping to get around the 280bhp mark with let going in mine but not sure yet. Look forward to seeing them in action 8)

[Jonlem]

lol, here's what happened on 75bhp jets, I reckon I was getting nearer 100bhp extra on these. Need a controller for the nitrous and maybe to learn not to hold it in too long! New engine already fitted!

http://img.photobucket.com/albums/v306/Jatec/Piston.jpg
http://img.photobucket.com/albums/v306/Jatec/Pistontop.jpg

[burgo]

do you collect ecu's lol

[Jonlem]

lol, you would think so wouldn't you! luckily I collect all xe bits I can lay my hands on, so I'm only short of some gaskets and rod bolts and another engine ready for gas will be in my new nova! sweet

[scott.parker]

oh nice,them pistons do look as if they enjoyed them self.........not :lol:

Ah well glad to here you got it sorrted mate.

scott

[Jonlem]

Nice one, yes all is in hand, just go to respray the bay and fit a new crossmember whilst the engine is still out.

Check out events on Turbo nutters for the review of the day!

Videos still to come

[a11ova]

looking forward to the videos 8)