PDA

View Full Version : Your BHP and Torque?


Anonymous
15-12-01, 01:39 PM
How much BHP and Torque does your Nova run?

Put a list of engine mods to.

My GSi runs 106.3BHP and 108.8lbs torque.

K&N, Powerflow Backbox,Boost Valve,Ecotek Valve.
Anonymous
15-12-01, 03:56 PM
1.4SRi
Standard everything (including exhaust filter and airbox)
92BHP
84lb/ft torque

(other rolling roads have recorded as much as 96BHP-no i dont know why either....)

Since then i have drilled the airbox and put a k&n panel filter in and it feels a little bit quicker.

No replys saying 'bollox figures' or anything-i have the printout in front of me to prove it, and Dec has seen it put out that much power on the rollers too.
Anonymous
15-12-01, 04:25 PM
1.4SR, totally standard, 120k miles:

71BHP @ 6091rpm
73lb/ft @ 3482rpm

All recorded at Regal Autosport.
Anonymous
15-12-01, 04:40 PM
lol freak, yeah I can back up those figures ;)

Mine?

1.6 16v
SBD 45mm Throttle Bodies
MBE programmable managment
BTB 2.25" System

152Bhp @ 7220Rpm
124lbft torque

(recorded @ Power Engineering in Uxbridge)

Dec
Anonymous
15-12-01, 04:41 PM
not sure yet ill tell u about febuary!
but it is fast!

2l 16v t45s (few other little bits)
Anonymous
15-12-01, 04:54 PM
same here, estimate 215-220bhp

2.0 16v
Jenvey 48mm tapered Throttle bodies,
DTA race systems fully programmable engine management
cams,
raised compression :-/
sbd manifold.
Anonymous
15-12-01, 05:18 PM
well i have about 40bhp so ner ner!!!!

(thats until the valver goes in after christmas) ;)
Anonymous
15-12-01, 05:19 PM
111bhp @ Hi-tech Motorsport in Brierley Hill. Dunno bought the torque. but it kicks ass @ 5000rpm.

1.4 SRi
100k mile wiv fsh and usual mods (zorst airfilter)

do have printout. Also got some nice emission test printouts if you want!
Anonymous
15-12-01, 05:43 PM
2.0 16v filter, chip, 1.2i zorst 163bhp
torque unknown

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D
Anonymous
15-12-01, 07:05 PM
129.6 BHP @4980rpm
143lbs/ft
@PTS in Luton

2.0 8v, powerflow exhaust, complete engine rebuild, & rebore,
Anonymous
15-12-01, 07:12 PM
1.4sr 116bhp not sure bout the torque.
1.4 block wiv 1.3 blydenstien B+ head twin 40's, shrick cam 290deg lift, f15cr box, lightened bottom end, omega pistons, and other little bits and bobs
Anonymous
15-12-01, 09:56 PM
Standard GTE, that's in serious need of a service, but when that's done, assuming all is ok with the engine, it should be nearish to the original figures of 100PS (74kW) @5600rpm (what ever that is in BHP?) and 99.6 lb.ft (135 Nm) @3400rpm
That's with just over 90K on it, standard everything.....I even bought an evil paper filter last week!
JP will be on soon though, and a K&N soon after ;)

As for the Antibes.....no idea really.....80 to 85 ish at the fly :-/
That's as it is now with JP system, Weber 32/34, K&N, 1.2 high-comp head.
I've never had it on a rolling road, so don't know.
Anonymous
16-12-01, 07:42 PM
GTE 126,000mls Wid Group A bigvalve head, K&N 57i, lightweight vernier pulley, 4 branch manifold, full janspeed system,

118Bhp 112lbs/ft

Needs rebuilt


Twitchin like a pigs eye!
Anonymous
17-12-01, 02:46 PM
the car that i use most day's has 350+bhp if that counts?!
M3 Evo (a few engine mods)
Anonymous
17-12-01, 04:24 PM
mine has since the 163bhp run had the std 1.2i zorst replaced with a 2.5" stainless rally one anyone want to estimate the gains? :D

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D
Anonymous
18-12-01, 10:18 PM
Bout 7 Bhp

Nova Sports never die they just keep getting rarer
Anonymous
20-12-01, 08:42 AM
96 BHP
1.6 GTE
Magnex System, sportex mainfold, KnN induction kit.
But i had only just finished a re-build on it the week before so it wasn't run-in properly at the time. I guess it would be 100-105 BHP now
Anonymous
20-12-01, 04:10 PM
NOVA 14 SRI. K.N, MAGNEX BACK BOX
R.R : 108 B.H.P :D