View Full Version : Few new pics of my engine bay
scott.parker
20-11-04, 03:16 PM
Well here is my new "polished" oil cap,and the power cap(i had to fit due to the SFI box spliting) plus it has give more room round the bulk,and slight increas on acceleration,allso a pic or two off my front strut brace and rear one,and the out side as it is at the mo,put the origanal grill back in,as i sold the other with my old bumper..
Before....
http://img66.exs.cx/img66/2916/nv04_4edit.jpg
After
http://img66.exs.cx/img66/3915/strutcap2.jpg
http://img69.exs.cx/img69/1811/strutcap1.jpg
http://img66.exs.cx/img66/5395/rearstrut.jpg
http://img69.exs.cx/img69/2864/stdgrill.jpg
Scott
5_door owner
20-11-04, 03:45 PM
looks mint mate :+:
what front brace is on there?
krobinson
20-11-04, 03:48 PM
Lovely mate
Front and rear brace's look excellent :D
Keith
scott.parker
20-11-04, 03:49 PM
looks mint mate :+:
what front brace is on there?
The front one (dont quote me on this)
i think it was an astra one,then cut and shorted to length,and rejoind(you can see it in the pic)..
scott
very tidy mate looks sound :wink:
scott.parker
20-11-04, 03:54 PM
very tidy mate looks sound :wink:
ah mate i got your blue laminate the other day,so i will be able to make your bulk cover :wink:
scott
Ste_Nova
20-11-04, 03:57 PM
fix that spare down... they are like missles if you have a crash! :o
DrivingSpanner
20-11-04, 03:58 PM
ummmm looking good, not sure about the strut braces, but looking good
very tidy mate looks sound :wink:
ah mate i got your blue laminate the other day,so i will be able to make your bulk cover :wink:
scott
nice one mate ta :wink:
scott.parker
20-11-04, 03:59 PM
fix that spare down... they are like missles if you have a crash! :o
its bolted through the center though you carnt see as the cap is on.
scott.parker
20-11-04, 04:00 PM
ummmm looking good, not sure about the strut braces, but looking good
what do you mean not suer about them??
ummmm looking good, not sure about the strut braces, but looking good
what do you mean not suer about them??
i like them... :D
DrivingSpanner
20-11-04, 04:07 PM
like the look of the front one, altho not with the weld only on one side, either get a weld bead put on the other end to match or have that one ground flat.
The rear one looks sweet but isnt going to be doing a great deal because it picksup in the wrong place, like most out there, should mount further down between the turrets not at the top bolt, but it looooooks sweat like that
scott.parker
20-11-04, 04:14 PM
like the look of the front one, altho not with the weld only on one side, either get a weld bead put on the other end to match or have that one ground flat.
The rear one looks sweet but isnt going to be doing a great deal because it picksup in the wrong place, like most out there, should mount further down between the turrets not at the top bolt, but it looooooks sweat like that
Ah right,well im going to try smoothing it oof a bit,but dont want to damage it,as for the rear yes i know i need one that go's bettwen the struts(on the arches) but it dont matter at the mo as im getting a cage in there,that well stop the bugger moving about :twisted:
scott
scott.parker
20-11-04, 04:19 PM
PS: once the standard inlet has gone(throttle bodys) i will change the front brace to a better one that follows close to the bulk head.
scott
Ste_Nova
20-11-04, 04:21 PM
you want one that goes point to point direct with a little bends as poss
scott.parker
20-11-04, 04:25 PM
you want one that goes point to point direct with a little bends as poss
i know..
http://www.mpsperformance.co.uk/img/alloy%20strut%20straight.gif
gettnig one like that.
DrivingSpanner
20-11-04, 04:32 PM
sweet, we dont just wanna put stuff on cause it looks good tho, do we ,otherwise we'll end up like LAX POWER< ahhhh Nothin but that
5_door owner
20-11-04, 04:34 PM
when you buy that one i want the one you've got on now.
pm me with a price when you change it as ill have it :+:
scott.parker
20-11-04, 04:35 PM
sweet, we dont just wanna put stuff on cause it looks good tho, do we ,otherwise we'll end up like LAX POWER< ahhhh Nothin but that
LOL nah mate,thats why my car is going for the track/fast road car..
scott
DrivingSpanner
20-11-04, 04:41 PM
good boy scott, good boy
You know it makes sense
loking very nice scott. A nice practical example
Chris
this may be a stupid question... but what are the tizer/redbull cans doing ?
are they covering over electrical connections !? i.e around the coil ?
*waits for the onslaught"
DrivingSpanner
20-11-04, 06:23 PM
yep, got it in 1 nickboy tizer can is covering the wiper motor
nice work
:twisted: :twisted:
:lol: fucking sweet as scott
Phil GTE
21-11-04, 02:16 AM
http://img66.exs.cx/img66/5395/rearstrut.jpg
What about cutting the ends off, dropping it down a bit and bolting to the car? It looks just wide enough.
It all looks very nice clean. Top job. I would want an alloy header tank to finish the job off.
looks good scott
but i would suggest removing the fanta bottle from under your spare wheel.
car might handle better then
:lol:
General Baxter
21-11-04, 01:10 PM
whats with the fanta bottle under the spare? :wink:
-Bruce-
21-11-04, 01:48 PM
the engine bay looks better now scott. nice and clean and shinny :lol:
are your back seats out all the time?? if so you could paint all the boot floor silk violet!! might look better. the strut brace does look the part but it needs to be fixed in the correct place lol :D
bruce
scott.parker
21-11-04, 04:20 PM
http://img66.exs.cx/img66/5395/rearstrut.jpg
What about cutting the ends off, dropping it down a bit and bolting to the car? It looks just wide enough.
It all looks very nice clean. Top job. I would want an alloy header tank to finish the job off.
Was going to no need though as im fitting a cage in there(when i get one and can be arsed to fit it)
But i did think of doing it mate,as i know a guy who could do it for me..
scott
scott.parker
21-11-04, 04:22 PM
the engine bay looks better now scott. nice and clean and shinny :lol:
are your back seats out all the time?? if so you could paint all the boot floor silk violet!! might look better. the strut brace does look the part but it needs to be fixed in the correct place lol :D
bruce
Cheers mate,as i say will all come toghether in time,the car will get a lick off paint in side just got to get it done..god you lot are think you can do everything over night :lol: ..
scott
scott.parker
21-11-04, 04:24 PM
whats with the fanta bottle under the spare? :wink:
Just in case i need a drink....
No it's got water in it,and it's in there cus i had a leakey water pipe,just never took it out,lol.
scott
scott.parker
21-11-04, 04:27 PM
this may be a stupid question... but what are the tizer/redbull cans doing ?
are they covering over electrical connections !? i.e around the coil ?
*waits for the onslaught"
Well as there add says "Tizer refresh your head"
So it in there to keep my engine cool :lol:
God im an advertisng campain for soft drinks :lol:
scott
nova---chris
21-11-04, 06:21 PM
The rocker cover dont match the car mate? or is it just me??? :lol:
Just kidding looking neat mate! :)
Nice one big difference now in the engine bay!!!
scott.parker
21-11-04, 06:28 PM
The rocker cover dont match the car mate? or is it just me??? :lol:
Just kidding looking neat mate! :)
Nice one big difference now in the engine bay!!!
Nice on mate,nah it's not ment too :lol:
scott
thats looking sexy scott, im loving that strut brace
scott.parker
21-11-04, 06:43 PM
thats looking sexy scott, im loving that strut brace
Glad you like it dude,funny i said about getting another one,and straight after i posted that i got a pm asking if they can buy it off me once i do..lol
scott
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.