PDA

View Full Version : SuperFlex vs PowerFlex


Anonymous
04-12-01, 10:09 AM
Whats the difference????

Just phoned Demon Tweeks and they said they deal with PowerFlex, dont do SuperFlex.
Novatech do SuperFlex ...
SuperFlex are ?75, PowerFlex are ?135!
I ordered SuperFlex before I even found out they were different...
they're both poly bush makers ...its confusing!
Anonymous
04-12-01, 11:28 AM
i think the superflex are softer and the powerflex are harder.... the powerflex come in 2 halfs, making them easier to fit

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D
Anonymous
04-12-01, 11:37 AM
yeah, nathan fitted superflex and they are a bitch to fit !!! Slippery little fuckers !!

not sure its worth another ?60 just to make em easier to fit if thats the only difference.

:D:D 2.0l 8v. It actually works !!!! :D:D
Anonymous
04-12-01, 12:30 PM
if Powerflex come in two halves, that also means they're easier to break into 2 halves too...

Superflex I say, and they're in Slough! save P&P!
picking them up later.
Anonymous
04-12-01, 12:38 PM
Ive heard that superflex can increase road noise....but then it was powerflex that said that. I think i will go for the cheaper option
Anonymous
04-12-01, 01:01 PM
the 2 halfs never get joined so they can't split... what you have been under the car for hours removing the old ones you don't want to be messing round with blocks of wood grease and vices to get the superflex ones in the powerflex are MUCH easier to fit

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D
Anonymous
04-12-01, 02:13 PM
It took me and my brother about an hour to do his and that was with the Superflex ones.

:D:D 2.0l 8v. It actually works !!!! :D:D
Anonymous
04-12-01, 02:29 PM
www.superflex.co.uk
?60 cheaper is what matters, and they both do the same job. 3yr warranty too.
Anonymous
04-12-01, 06:47 PM
half an hour to do the
rear beam
tie bars
anti roll bar
lower arms
?


16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D
Anonymous
04-12-01, 07:36 PM
Powerflex ones are very easy to fit. The hardest part is getting the old ones out. Rick

They say "good things come to those who wait" and me and John have waited longer than most!
Anonymous
05-12-01, 09:52 AM
cut them out.

:D:D 2.0l 8v. It actually works !!!! :D:D
Anonymous
05-12-01, 08:21 PM
Supeflex have been advertising recently in CCC slagging Powerflex off saying that the
materials used are diff.I've used Powerflex but I aint used Superflex so i couldn't really say. Someone posted a few weeks back (was it Micky??) saying that new std. ones are worth trying. This I have tried and they tighten everything up very nicely without being too harsh.
Anonymous
05-12-01, 09:19 PM
How much are new standard Vaux ones out of interest?
Anonymous
05-12-01, 09:25 PM
all i can say is....
Robs spider = powerflex
My 2.0 16v = powerflex
My 1.4van = powerflex
and we have had no probs with fitting or ride

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D
Anonymous
08-12-01, 04:26 PM
I had PowerFlex on my RST, they were fine too.
I say both products are prob the same!
both poly bushes, but SuperFlex nearly half the price.