View Full Version : Fitting SR carb to a 1.2
Are there any problems doing this or is it a straight swap?
Understand that the 1.4SR inlet wont be ideal because of the squared ports but it'll work yes.
Cheers
sTuDeNt
01-11-04, 12:12 PM
You can still use 1.3 manifold i think... What carb is it? Pierbug 2e3? If so then you can use your 1.3 manifold, else not too sure!
Snowface
01-11-04, 12:40 PM
u need 1.3 manifold + caebrettor, plus you nead to pipe in the auto choke.
or get a manual choke conversion kit.
easy to plumb in? or not?
could a novice do it?
Cheers
gaz_nofx46
01-11-04, 04:42 PM
Manifold and carb change is easy..
Choke conversion could be difficult. (Never done it)
yeah I guest that the actual carb change is easy mate...is the Auto choke easy to plumb in or not?
Cheers all :+:
James B
01-11-04, 07:04 PM
the autochoke is piece of piss to plumb in but you will also need another hose, which snakes from underneath the carb to heater matrix hoses in bulkhead. its a spiral shaped hose think bout ?30 from dealer but get it from scrappy. IF you go there you can get all necessary pipes and double check how they fit
James
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.