Wiring Up a Cav Elec Sunroof In a Nova.

[DEATHCAT]

does anyone have the fitting guide i been looking and asking everyone i could and no one seems to have it since nova-land got rid off it.

im sure someone has it deep within there harddrive i really need this because the standard one is s**t.


thx in advance

[DEATHCAT]

so not one person of the 1000's on here can be bother to look and reply !

[Riggy]

i have it in an old total vauxahall ill try dig it out tomorrow for you :D

[Freak]

mk 2s have a spare socket destined for it in the fuse box (designed for the sunroof and heated seats on continental models, and i ran both with no problems from it)

Run the wire up the a pillar

[DEATHCAT]

i have it in an old total vauxahall ill try dig it out tomorrow for you :D

thx m8


mk 2s have a spare socket destined for it in the fuse box (designed for the sunroof and heated seats on continental models, and i ran both with no problems from it)

Run the wire up the a pillar

i will need a installation guide since im not very good with electrics ;)

[Freak]

there isnt one.
To be honest, i did it three years ago, and sold the car 2 years ago so any notes i made will have been binned
In the back of the haynes it shows which fuse box number and the wiring diagram for it.
Not hard

[DEATHCAT]

i have it in an old total vauxahall ill try dig it out tomorrow for you :D

riggy m8 you found it yet by any chance

thx in advance

[Riggy]

:oops: in honesty i did get to look been busy with work but ill do it in the morn for you :D

[DEATHCAT]

:oops: in honesty i did get to look been busy with work but ill do it in the morn for you :D

you found it yet m8 ???

thx in advance

[a11ova]

:oops: in honesty i did get to look been busy with work but ill do it in the morn for you :D

you found it yet m8 ???

thx in advance

bit inpatient arent we?! :P

[Chris]

you dont need a guide and you dont need the extra wire from the fuse box. Remove interior light. Remove the winding handle from sunroof and the plasic surround. Then remove the metal shaped thing where the handle goes in which is held in by 2 screws. Now bolt up the electric unit and attach the two wires, you will need to then break into the wires for the interior light, you can use scotchlok's for this. Then refit the plastic shroud and interior light into it.

Hope that is of some use to you

Chris

[DEATHCAT]

:oops: in honesty i did get to look been busy with work but ill do it in the morn for you :D

you found it yet m8 ???

thx in advance

bit inpatient arent we?! :P

first off m8 im not impaitent have you seen the date on the post before mine Nov 3 my reply was Nov 27.



you dont need a guide and you dont need the extra wire from the fuse box. Remove interior light. Remove the winding handle from sunroof and the plasic surround. Then remove the metal shaped thing where the handle goes in which is held in by 2 screws. Now bolt up the electric unit and attach the two wires, you will need to then break into the wires for the interior light, you can use scotchlok's for this. Then refit the plastic shroud and interior light into it.

Hope that is of some use to you

Chris

ok m8 understand but there 2 wires on the motor 4 connectors on the light and 1 on the switch.

thats 7 wires ??

what do i do with all these.

[a11ova]

:oops: in honesty i did get to look been busy with work but ill do it in the morn for you :D

you found it yet m8 ???

thx in advance

bit inpatient arent we?! :P

first off m8 im not impaitent have you seen the date on the post before mine Nov 3 my reply was Nov 27.



you dont need a guide and you dont need the extra wire from the fuse box. Remove interior light. Remove the winding handle from sunroof and the plasic surround. Then remove the metal shaped thing where the handle goes in which is held in by 2 screws. Now bolt up the electric unit and attach the two wires, you will need to then break into the wires for the interior light, you can use scotchlok's for this. Then refit the plastic shroud and interior light into it.

Hope that is of some use to you

Chris

ok m8 understand but there 2 wires on the motor 4 connectors on the light and 1 on the switch.

thats 7 wires ??

what do i do with all these.

still impatient :lol: :lol: