View Full Version : how hard ?
NoVa_KhAn
23-10-04, 03:11 PM
isit 2 put a 1.4sr engine in my 1litre?
some one told me its bit of a mission cos 1 litres r totally diff?
drops right in, same mounts too, just need to get the 1.4 coil loom and dizzy
Snowface
23-10-04, 05:46 PM
isn't 1 engine mount different on 1.0? or is it gearbox.
i thinks its easy to change the mount though
the mounts are the same and it will just drop in :D
but you have to change the petrol tank as the 1 litre doesnt have a return feed :D and you will have to run the line down aswell :D
General Baxter
23-10-04, 06:18 PM
i read somewhere you need the mount off the 1.4 engine as the 1L mount it lower or higher up/down :lol:
Snowface
23-10-04, 06:26 PM
you won't need a return line if you are going to use Twin forties or a weber 32/34. Just get a regulator.
i think thats why the pierburg's had a return, because they know the mech pump is going to be too much pressure.
Where as on webers where there is no where to put a return, then u have to have a regulator.
u cant put one engine inside another!
NoVa_KhAn
23-10-04, 09:04 PM
thanks 4 the help lads!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.