View Full Version : c20ex to c20let
scott.parker
21-10-04, 07:30 PM
I just need to know the main difference between the spec/set up of the two engines, like how the heads are different and same on the bottom end please..
And i take it that the down pipe of the manifold is the same leangth and meets the system in the same place?
Scott
the compression is lower because of the pistons and the ecu/ wiring is also different,
then you have the turbo and inlet that is added, and finally the down pipe from the turbo is different
scott.parker
21-10-04, 08:02 PM
humm.balls was hoping it may have been an easy swap over of the head,and manifold,and ecu. :(
scott
think you can just bolt the turbo on but you will have to restrict the boost to about 3 psi as the engine will melt otherwise lol, also the fueling will have to be uprated too
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.