View Full Version : Will a cam from a 1.3s fit my gsi?
I think it will but may be wrong? It's an ast2 kent cam btw....
yes
use the followerd from the AST2
Snowface
20-10-04, 09:29 PM
if your using the ast2 on an injection GSI then it might not work quite so well.
They are meant for use on carb's (T40's) I think the kent NVO 61 is meant for GSI's/GTE's.
Something like the ECU doesn't manage the engine as well using an ast.
very true snowface, i put an ast 15 in my 2.0 8v and with the injection it gained me errrrr 1 bhp lol
then with the carbs i got 8 bhp if not more. dam crap vauxhall injection
It'll be going in with my twin 40's :D
Snowface
22-10-04, 09:33 AM
that'll be fine then. Will see around 120bhp with just those 2 mods.
You'll need a fuel pressure regulator though, especialy if your using the electric pump.
I've got a facet red top pump in the post. I'll be fitting a ported and polished head at the same time and currently i've got a 4 branch manifold and full magnex system-i was hoping to see around 130bhp all together. What do you think?
Snowface
22-10-04, 10:21 AM
sounds about right. Good luck.
Cheers mate, i'll post up the figures once its been r/r'd
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.