my new car

[yellow nova]

well i got it at billing http://img44.exs.cx/img44/3005/2004_0824Image0001.jpghttp://img76.exs.cx/img76/3548/tb4.jpg

[Jules]

Saw it at VBOA and was mightly impressed - the attention to detail and the little touches are awesome.
:+:

[5_door owner]

:o thats well nice mate, looks mint, wherebouts in stockport are ya (im in cheadle heath) aint seen the car around

u got messenger? pm me ya email addy if ya have

[nuno_gt]

Very awesome car, m8. Keep it up this way. :wink:

[peester]

you lucky sod. probably my fav ever nova that is. theres just 2 things missing for it to be perfect; for it to be an L-reg and the black orig. vinal on boot.
nice one mate. enjoy and look after.

[Dpnova]

Looks superb

[srs1]

that is a stunning car you got there dave.

hope you keep this one. (you keep selling all the nice cars you get)

[Al Wilson]

Engine bay looks mint, I can only but wish of something that clean. :D

[yellow nova]

well ive just had the turbo rebuilt. just to do a few other jobs to do on it before sunday. and then after that im go to paint both sides and the bumpers 5_ door i live in offerton only had the car a few weeks and have not been out in it yet :evil: because of the turbo will see you all on sunday

[karl Rowntree]

Mint nova dave, glad you got the turbo sorted mate. Stick with that engine i say.

See you sunday mate.

Karl

[epo]

looks sound that

[Riggy]

yeah looks well nice mate :D

[isrs]

nicest car iv seen mate, looks well good!
what sort of bhp you looking at with it. and how much it cost ya?

[Mike.]

awesome looking car mate, a proper minter

[yellow nova]

150 bhp 160 ft

[isrs]

sounds good mate got any more pics of it

[scott.parker]

Yes i thought i knew this car from somewhere,it use to belong to a guy called danny savory who is in the vpcc.

SPEC:1650cc full rebuld,lightend flywheel,Courtany 2mm decompresion plate using two gm head gaskets,courteny micro swith for fule enrichment,courteny cs15 ported head,full 2.5-inch power flow exhuast system with 3.5-inch tailpipe,fse adjustable fule presure regulater set to 3.5 bar,standard leads and plugs,sfs turbo hoses,pace intercooler,bailey twin piston dump valve.

TRANSMISION:standard f13 five speed manual.

PERFORMANCE:150.7 bhp,160lb ft torqe running 8psi of boost.

BRAKES: front:288mm v6 discs & calipers,EBC greenstuff pads REAR,standard drums

SUSPENSION:blistein shocks with 40mm pi springs.

Mate i think you have a very special car there dont let it go,but if you do ever wish to sel i will be happy to buy it off you mate :wink: :D

scott

[novataka]

well nice that m8 sweet ass car

[yellow nova]

just a new pic for you all cars in bits now while i do some work on it :o it needs a bit more that i first thought http://img76.exs.cx/img76/3545/nova16turbo001.jpg][/img]

[scott.parker]

Ahh that looks messy mate,not as nice under there as it look's,ah well nothing that carnt get sorrted,hey..

scott

[burgo]

thats had alot of welding praps not quite as mint as i first thought, still very nice though

[Rick Draper]

Novas come with rust there as standard dont they dave! What have you been using to remove all the shitty old underseal? Finished my drivers side one months back but i have only half done the pax side one as it startes to piss me off. I was using a plastic wheel that slots in the drill, wondered if you knew anything better?

Ta
Rick

[yellow nova]

rick i used a wire brush on a wheel on a electirc drill can do a wheel arch in a few hours will post another pic later of it finished its only this side thats like that

[yellow nova]

thats better http://img123.exs.cx/img123/6876/nova16turbo003.jpg

[~~joycey~~]

I LIKE THE CHROME WING BOLTS

[yellow nova]

http://img21.exs.cx/img21/5200/nova16turbo007.jpg well thats one side pianted

[scott.parker]

Thats looking better mate,sell be very nice once done.

scott

[yellow nova]

well its painted now http://img110.exs.cx/img110/5097/nova16turbo0147tm.jpg