View Full Version : donking noise when breaking ??
te17@novasgonemad
26-09-04, 06:32 PM
right i have me car back, took it out for a test drive and when i brake i get like a donking sound some times when i press the pedal, other times a few seconds after i have started pressing the pedal ie,, whilst braking still, sometimes when i brake hard other times soft but i havent got a clue any ideas (bearing in mind that vauxhall had me 2ltr calipers off me hubs for the past week whilst playing with the engine
Philsutton
26-09-04, 06:35 PM
caliper bolts not done up tight?
lol@donkin
sorry i have no useful information just found the word donkin funny
te17@novasgonemad
26-09-04, 07:03 PM
wot it is me new tech terms like innit bruv lol i dunno wot its called mate but thats wot it does tho :D
good description lol @ donking
mine was doing this and it ended up being a combination of warn bushes and caliper bolts moving (not tight enough)
This might sound stupid, but you havent got something sliding around under your chair or in your boot have you? when you break its sliding forward and hitting part of the car?
Jim
smithy87
26-09-04, 08:21 PM
This might sound stupid, but you havent got something sliding around under your chair or in your boot have you? when you break its sliding forward and hitting part of the car?
Jim
lol, never rule out the obvious.
sounds like a knackered cv joint. do you get a similar 'donk' if you floor it after the initial donk?
could be inner or outer, depending where the noise is coming from.
hiya
would call the cv more of a rattley click than a donk :D
also more likely to maifest iteself on turns first of all...
Phil
I have that donk noise, had the caliper off yeasterday to fit me newer shiny painted up and good lookin hubs.
The noise on mine is a worn slide, so the caliper goes donk on the slide and it does sound like loose bolts, deceiving! Grab the caliper and wiggle fwd bckwd.
hiya
would call the cv more of a rattley click than a donk :D
also more likely to maifest iteself on turns first of all...
Phil
for an outer cv maybe, but inner cvs go like this, and it is a donk. happens on many fwd drive cars with pop-in shafts
would call the cv more of a rattley click than a donk
So that's what explains my Clattley noise !
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.