View Full Version : my nova's engine bay...
follwing on from the first thread,
the engine bay started off like this...
http://img.photobucket.com/albums/v321/bennh/100_1331.jpg
naff welding (all tho it held up 4 all most a yr)
i showed the body shop how i wanted,and i started takin the paint back to bare metal for rewelding and smoothing
http://img.photobucket.com/albums/v321/bennh/noloom.jpg
we welded up every hole that wasnt needed,all the loom holes where plated over and smoothed,
http://img.photobucket.com/albums/v321/bennh/smoooth1.jpg
the bay was primerd and made fully smooth
http://img.photobucket.com/albums/v321/bennh/primerd6.jpg
then painted,1 first time we werent happy with a few bits so it was rubbed down,and smoothed in a few bits and re painted,
polished up to a high shine!
she came home,so i could re wax her up and re fit my brake line (new and hidden as poss)
then to day we set about re fitted my painted up and clean engine
http://img.photobucket.com/albums/v321/bennh/engineblackweb.jpg
then fit the engine in from the top with out scratching anyof the sexy paint
http://img.photobucket.com/albums/v321/bennh/smoothblue1.jpg
http://img.photobucket.com/albums/v321/bennh/engineblack3web.jpg
http://img.photobucket.com/albums/v321/bennh/engineblack2web.jpg
got 2 finish off painting the block and cleaning up bits 2moz,
and get everything up and running,then the rest of the car will be done,
ready to b unvailed at billing,
finish extending my wiring loom and re fit a few bits
big big thanks to the guys at station body shop!
big thanks to sarah gte(me ladie!)
big thanks to dan and tom the legends and sharon for the tool run
let me know what u think.....
ben
krobinson
31-08-04, 10:43 AM
As said on MIG, looking good benn! Looking forward to seeing it in the flesh!
Keith
-Bruce-
31-08-04, 11:34 AM
that looks really smart benn, nice work!!
bruce
Ste_Nova
31-08-04, 12:37 PM
should have fitted cosra servo and cav wiper motor
does the corsa servo make braking any better?
i'm running v6,
and cav wiper motor? info please!
and thanks broos3
Matt Nova
31-08-04, 04:26 PM
looks mint mate good work
Fairplay to you for going in through the top!
i cant see why people go in from the bottom....
its easier, as simple as that!
good work mate, looks top, but wont the filler crack?
how come the last pics are in B+W?
I always put them in from the top
looks mint, take it your going for show car looks rather than function then. looks dam smooth tho.
also im interested in what the cav wiper motor has to offer, and the corsa servo
-Bruce-
31-08-04, 07:02 PM
im also interested what a cavi wiper motor would do for us?
bruce
looks mint, take it your going for show car looks rather than function then. looks dam smooth tho.
nar...f**k that,she's gonna b as concouse as poss but still driven everyday
and taken to the limter everyday(might not b true...motorway fun more..)
Philsutton
31-08-04, 09:41 PM
only thing i can think of for using the corsa servo is that it sits where the battery is an frees up space along the bulk head.
Surely the torque and vibration of the XE will cause that filler to crack, or am i missing something?????
a2lt16v
01-09-04, 08:56 AM
I WAS THINKING THAT
MIGHT LOOK A BIT SHIFTY THEN
krobinson
01-09-04, 10:43 AM
Surely the torque and vibration of the XE will cause that filler to crack, or am i missing something?????
Should be fine, mine is done simaliar to his. Only mine used flexable fiberglass over thick welded in metal. Bay was also seam welded first. Then a very small skim of filler to make sure it was completely smooth!
Karl's engine bay has been smoothed now since 2002 and hasnt cracked!
Keith
as keith said,
thick metal is welded in,after the bay was re welded
then flexi fiberglass is used 2get the last bit of shape,
then a very small skim of filler 2 make sure its smooth
u'll b amazed how little a nova bay move's even with an xe in there
have a mate who didnt weld his engine bay,
its still fine after 2yrs aswell
I dont think welding the bay is essential, just optional.
same,
but cause of the smoothing it needed 2 b
Ste_Nova
01-09-04, 03:51 PM
corsa servo fits in battery tray as does cav wiper motor.... even less stuff in the bay :)
same,
but cause of the smoothing it needed 2 b
I would agree with that yes, if i was having it smoothed i would have it welded, if not then i wouldnt weld it.
Al Wilson
01-09-04, 05:36 PM
A top job there mate, have always loved the smooth look, I'm sure it will not crack if the welds are in place and the fillers not too thick as you've said. Good on you!
Like the arty B&W photos too lol
Al
whitty_nova_1300sr
01-09-04, 09:29 PM
looks the tits m8 well nice. 8) 8) 8) 8) 8)
-Bruce-
01-09-04, 10:17 PM
corsa servo fits in battery tray as does cav wiper motor.... even less stuff in the bay :)
have you got any pics of this set up ste? as im sure me and others would be interested in them and how they will work?
cheers
bruce
corsa servo fits in battery tray as does cav wiper motor.... even less stuff in the bay :)
And surely being right above the brake pedal the linkage has far less distance to travel in order to work, so in theory wouldn't it result in a better brake pedal?
:roll:
-Bruce-
01-09-04, 10:35 PM
yeh i would have thought that is correct jules, as you will have less play in the brake pedal if you mount the master cylinder on the driver side!! im sure i have seen a pic of it before not sure though. very interested in the cavi wiper motor set up?
bruce
Benxe'd wrote
u'll b amazed how little a nova bay move's even with an xe in there
have a mate who didnt weld his engine bay,
its still fine after 2yrs aswell
I had a valver for nearly 5 yrs mate, 2 x magazine featured, 6,000 miles a year and I never had the seam welding..... still looked immaculate when I broke it.....
With the vibration and harshness of the engine, I personally thought it may be a problem having any filler at all under the bonnet....
Just interested really......
the filler is only a very thin skim,
the rest of metal,
so it should b ok....
Ste_Nova
02-09-04, 01:13 PM
yeh i would have thought that is correct jules, as you will have less play in the brake pedal if you mount the master cylinder on the driver side!! im sure i have seen a pic of it before not sure though.
yeh mine :lol:
http://img.photobucket.com/albums/v343/Ste_Nova/servo.jpg
http://img.photobucket.com/albums/v343/Ste_Nova/servo005x.jpg
any pics of the wiper motor ste?
Ste_Nova
02-09-04, 03:39 PM
any pics of the wiper motor ste?
no cause it ain't finished yet
ah thats the puppy. is that how it comes from the corsa or have you mounted the cylinder on top of the nova pedal some how. looks exactly what i need to do.
that 2 mine epo?>
you what mate?
u said nice,
was that 2 my bay?
yes sorry missunderstood :oops: :lol:
YellowTurbo
11-09-04, 06:12 PM
What strut brace is that on the first pic?
spacro,?50 from halfords...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.