Log in

View Full Version : Questions Two I Have For You........



smithy87
27-08-04, 12:07 PM
Maybe quite a common question, but what's the offset of the MK1 and/or MK2 standard 3-spoke alloys that came off the GTE, etc.

AAAAAAAAAAND

M3 mirrors OR DTM mirrors OR the new-fangled m5 mirriors?

Im after a good field of vision.

Cheers.

Philsutton
27-08-04, 12:32 PM
the ones that came off the GTE/GSI where slightly different from the others? Bout 47.5 Someone will probably tell me im wrong. Not too sure though

Benn
27-08-04, 01:02 PM
i had a set of gsi rims on a 49mm,
and i dont think u will get a great view from, any of the mirrors,
but dtm would look best...
ben

smithy87
27-08-04, 02:26 PM
Im looking to put a set of the standard 3 spokes on my MK1 5 door currently with the standard ET49 steelies

So, basically, what ones, if any, would fit?

Benn
27-08-04, 03:00 PM
gte and gsi will fit fine

smithy87
27-08-04, 03:10 PM
gte and gsi will fit fine

MK1 gte/gsi or MK2? Or either?

Philsutton
27-08-04, 04:18 PM
any vauxhall 14s will fit its only when you go bigger than that that you might experience rubbage

Benn
27-08-04, 04:45 PM
there the same wheels

Ste_Nova
27-08-04, 05:09 PM
early ones were only 4.5" wide and 49mm offset..

later ones are 5" wide and 47.5 offset

Philsutton
27-08-04, 05:28 PM
ah thought there was a slight difference

epo
27-08-04, 06:57 PM
get dtm's m3's stick out too much and look shit imo

nova_rally
27-08-04, 09:16 PM
early ones were only 4.5" wide and 49mm offset..

later ones are 5" wide and 47.5 offset

Early ones are also 5" wide and ET49.

I have ET49 x5J on the rear of mine and ET47.5 x 5J upfront. Mate has ET49 x 4.5J on his.

Alan

Matt Nova
28-08-04, 06:09 PM
can you see alot with DTM mirrors? I've got m3s and i don't like how they sit so far out.

Rach
28-08-04, 06:36 PM
can you see alot with DTM mirrors? I've got m3s and i don't like how they sit so far out.

my mate had dtm's and said they were quite awkward to use... parking etc.

:?

maybe it was just them though :lol:

epo
29-08-04, 07:52 AM
i never have any problems with dtm's i found m3's akward as they stick out like a fooker