View Full Version : T40 Timing
5door_racer
19-08-04, 12:41 AM
I read my haynes and it says the timing is 10 degrees btdc but what is the correct timing with t40's as i konw you have to advance it but not sure how much
S_Gault
19-08-04, 09:01 PM
If you have a std dizzy then 11deg or so at 1100rpm on 40s will give around 31 degrees max timing at 5000rpm. (which is about right).
Or if you have a professional snap=-on type timing light, rev engine up and set the full advance and forget about the idle figure.
Steven
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.