Paul
30-07-04, 12:48 AM
I have a webber carburettor for sale, It has covered approx 17-20k, about 1 1/2 years old.
It is being sold with adaptor plate, manifold for a 1200/1300 or 1400 (please let me know, which you require).
Comes with K&N Filter, not very good condition but still works fine. Friction from the strut brace causing the damage.
It is jetted/set up for a lightly tuned 1.4SR.
http://img.photobucket.com/albums/v14/lashednova/DSC01104.jpg
?75 plus P+P
Cobra Monaco's
FIA Approved, could do with a retrim on the lower bolster where you sit, they havent faded though as have only been in a mates car for a week before he decided that they were impractical.
Material is about ?25 per sq/m from Cobra which is plenty for what needs doing.
http://img.photobucket.com/albums/v14/lashednova/DSC01142.jpg
http://img.photobucket.com/albums/v14/lashednova/DSC01143.jpg
/\ Worst bit :?
http://img.photobucket.com/albums/v14/lashednova/DSC01145.jpg
Could be sorted this one V
http://img.photobucket.com/albums/v14/lashednova/DSC01146.jpg
Not VGC, hence ?60 plus P+P
NO SUBFRAMES EITHER
Reconditioned 1300 Nova Cylinder Head.
I have used it for 900 miles, before I bough T40s on a 1400 inlet, so I swapped back to a 1400 head.
It was reconditioned by an engineering firm, I paid a lot more than I'm after...
Had new valaves, valve stem seals, valve springs, and skim (very small amount), polished exhaust ports...
http://img.photobucket.com/albums/v14/lashednova/DSC01105.jpg
Picture of it brand new \/
http://img.photobucket.com/albums/v14/lashednova/DSC01073.jpg
Email me at lashednova@hotmail.com
Or PM me please,
thanks
Paul
MAKE ME AN OFFER IF YOUR NOT HAPPY WITH THE PRICE
Also available very soon,
VGC GSi Interior, drivers bolster NOT worn though, has rear headrests and black vinyl front cards to match the rear ones, I paid ?150 fot his interior, so make me an offer..
Set of 60mm lowering springs, Jamex ?40 delivered.
Novadose Side Skirts, been fitted to a car, but not smoothed, been removed, and are in good condition. ?50 plus delivery
Sportex 3" Backbox, very nice sounding exhaust and exits at a straight angle. For a 1200/1300 or 1400. Mild Steel ?50 delivered. One year old
Thats all I can think of for now.
Paul
It is being sold with adaptor plate, manifold for a 1200/1300 or 1400 (please let me know, which you require).
Comes with K&N Filter, not very good condition but still works fine. Friction from the strut brace causing the damage.
It is jetted/set up for a lightly tuned 1.4SR.
http://img.photobucket.com/albums/v14/lashednova/DSC01104.jpg
?75 plus P+P
Cobra Monaco's
FIA Approved, could do with a retrim on the lower bolster where you sit, they havent faded though as have only been in a mates car for a week before he decided that they were impractical.
Material is about ?25 per sq/m from Cobra which is plenty for what needs doing.
http://img.photobucket.com/albums/v14/lashednova/DSC01142.jpg
http://img.photobucket.com/albums/v14/lashednova/DSC01143.jpg
/\ Worst bit :?
http://img.photobucket.com/albums/v14/lashednova/DSC01145.jpg
Could be sorted this one V
http://img.photobucket.com/albums/v14/lashednova/DSC01146.jpg
Not VGC, hence ?60 plus P+P
NO SUBFRAMES EITHER
Reconditioned 1300 Nova Cylinder Head.
I have used it for 900 miles, before I bough T40s on a 1400 inlet, so I swapped back to a 1400 head.
It was reconditioned by an engineering firm, I paid a lot more than I'm after...
Had new valaves, valve stem seals, valve springs, and skim (very small amount), polished exhaust ports...
http://img.photobucket.com/albums/v14/lashednova/DSC01105.jpg
Picture of it brand new \/
http://img.photobucket.com/albums/v14/lashednova/DSC01073.jpg
Email me at lashednova@hotmail.com
Or PM me please,
thanks
Paul
MAKE ME AN OFFER IF YOUR NOT HAPPY WITH THE PRICE
Also available very soon,
VGC GSi Interior, drivers bolster NOT worn though, has rear headrests and black vinyl front cards to match the rear ones, I paid ?150 fot his interior, so make me an offer..
Set of 60mm lowering springs, Jamex ?40 delivered.
Novadose Side Skirts, been fitted to a car, but not smoothed, been removed, and are in good condition. ?50 plus delivery
Sportex 3" Backbox, very nice sounding exhaust and exits at a straight angle. For a 1200/1300 or 1400. Mild Steel ?50 delivered. One year old
Thats all I can think of for now.
Paul