Breaking SR

[Cheese]

*EDIT* Few parts sold (see below), Everything left for sale "Cheap as Chips" (Except Carbs!) Just make a half reasonable offer and its yours!! Dont want to have to throw stuff away!! :?

After 7 years, due to 2nd car, lack of funds and time (and complaining parents) the nova has finally got to go :(
Was planning on putting a valver lump in it, but just dont have the time at the moment. Would make a good starting point for a project.

Engine Bits:

1400 SR Engine 95k Approx
New cam belt / Water pump
New head gasket, valve seals, all valves lapped in, etc
Done 10 miles since re-assembly

F10 CR Gearbox

4-1 Tubular manifold

Janspeed Backbox

Weber 32/36 DTML Carb, on 1300 inlet. With Piper X filter + Spare

1300 Fly wheel - Ideal for lightening for your engine

1400 Cam pully - maybe usefull to someone!

Spare set of Weber 40's - Worked perfectly when removed from previous engine, but will need chokes/jets and trumpets to fit to nova engine

1300 Irmscher 40's inlet manifold with carb fitting kit - SOLD

Lowered Alternator plate and adjustment arm to use with 40's - SOLD


Brakes & Suspension:

Gte master Cylinder and SR servo

Nova GSI calipers/disks/ebc pads

Corsa GSI calipers/disks/ebc pads - may need new pads - Will not fit under SR 3 spoke alloys!!

Goodrich Braided brake lines F&R - SOLD

Tuning.co.uk -60mm F&R springs
Rear- Eibach dampers Front- Gte dampers

F&R SR Anti roll bars with all fixings


Interior:

MK2 Grey dash

Full mk2 Interior - blue/grey, including F&R Seats, door cards and illuminated sun visors. Usual wear on drivers bolster

Gte Grey carpet

Mountney D shaped steering wheel and universal boss

Small steering wheel, approx 30cm diameter, may be good for track days??

Black leather gear gator & polished gear knob

Various solnoids for central locking / boot release

TIM Oil pressure/temp and volt guages - SOLD

MK1 Clocks with Lockwood white dials - No Rev counter

Beesting Aluminium arial

Body Work:

Mk1 SR Grill - as new

Mk1 SR F. Bumper, Faded but not scratched, ideal for a repaint or someone wanting a "real" old school look! :lol:

Passenger door

Bonnet

Drivers door, red, sanded for spraying. no rust

Bootlid lock/wiper/spoiler holes smoothed. Sanded ready for spraying

All glass except windscreen

Wheels:

4x SR 3 spokes - Good condition 2 with mint Yoko A520 tyres, 2 with Yoko A539

Spare SRi Steel with Yoko A539

All tyres are 185 / 60 / R14 With 4mm + tread


Other bits and pieces:

MK1 Rad fan

SR Starter motor

SR Alternator

SR Airbox - ideal for winter

Usual bits like headlights, clear indicators, etc

Haynes Manual

5x Mitsubishi alloys - NOT NOVA FITMENT, but with mint 195/60/R14 Bridgestone tyres. May be usefull to someone.


Shell: In average condition, had no welding underneith. Boot floor has a small amount of rust in the corners. Ideally needs a new lower front valance/cross member after an unfortunate incident with a badger!! :( Cross member is fine, but panel infront is bent at the bottom, as is the bottom of passenger wing, although not visible with the bumper on!
Rear arches/wings are pretty good..

Open to offers on all parts, or come and take the lot away! Dont want much for any of the parts so make reasonable offers and theyre yours.
Can post smaller parts at buyers cost.. Or meet locally..

Parts and car located 15 miles from Oxford. Postcode address: HP18

Please PM me here, or e.mail to: Ben__hunt@hotmail.com, or catch me on MSN by clicking the Messenger icon below.

Pics available on request

Thanks,

Ben :D