PDA

View Full Version : 1.3, What can be done to mod it????



walshie
09-06-04, 01:59 PM
After trying to get hold of a 1.4sr enginer for many months i have decided to get a 1.3 as i can get it for ?50 plus my 1.2 engine is drinking more oil then petrol. What can i do to make a 1.3 soind and preform better? Whats the top speed in a 1.3?

Dpnova
09-06-04, 02:12 PM
you can put twin 40 carbs on the sr, you can make 1.3 sr's rapid acceleration but the top speed wont be great

Jack
09-06-04, 02:35 PM
Filter, exhaust (complete system & manifold), 32/34 or if you got a bit more cash T40s, cam... should see you a fair few extra horses

Stripping out the car (thus making it lighter) might shave a bit off your 0-60... and fitting bigger brakes would be handy too!!

Top speed in a 1.3 depends on the gearbox i guess, but somewhere about 100-120?

Adam
09-06-04, 11:37 PM
I'd deffo recommend stripping the rear out for a cheap mod, its suprising how much difference less weight makes. And it costs nothing.
But the mods suggested will give you best performance.

benji
09-06-04, 11:50 PM
this is a good example

http://www.novaload.net/forums/viewtopic.php?t=94254

5door_racer
10-06-04, 07:38 PM
The way to get most out of your 1.3:

Weber twin 40's (delorto's are ok too, wouldn't buy solex though)

Get the head done (ported, polished, skimmed etc.)

Get a cam kit of kent like the ast2 and fit the high lift vavles to go with it.

Got bout 40% power gain and sound is something you only beleive when you hear it!!!!

krobinson
10-06-04, 08:10 PM
I fookin cant wait to get my 1.3 engine fitted and on the road. Cant wait to hear it :D

Keith