Firing order for a 1400SR Mk1

[Paul]

As above really.

Where do my HT Leads go, i jus ripped them all off without even thinking. :cry:

[m.d.]

turn the engine over till the timing marks line up on the cam pully and the cam cover.
then look where the rotor arm points to inside the dizzy cap. this will be no1 so run a lead from there to the plug closest to the cam belt side of the engine.
then working anticlockwise arround the dizzy cap (towards you) the next lead will go to no 3 plug
then the next lead from the dizzy will go to no 4 plug ( closest to the dizzy)
then finally the last leed will go to no2 the only remaining plug left.

1342 :wink: