View Full Version : 16valve breaks helpppp!
madcodling
25-05-04, 08:29 PM
ive just put 2.0 16 valve breaksand calipers on my 1.4 i also replaced the hose leads and fitted a gte brake servo but all brakes bleed fine but when i put my foot on the pedel theres nothing there please help
cheers
madcodling@hotmail.com
have you pumped the brakes
madcodling
25-05-04, 08:45 PM
DOHH
Of course i have but nothing its as if theres no fluid in the lines but they bleed perfectly but still no breaks
Austin_Nova16
25-05-04, 10:04 PM
Have you got the calipers on the correct sides. Bleed nipples should be at the top.
madcodling
25-05-04, 10:40 PM
yup
madcodling
26-05-04, 06:20 PM
furthest from the servo first ive bled them all right ive done it hundreds of times before but this time there bein a pain
Snowface
26-05-04, 06:53 PM
have u adjusted the pedal? apparently there's and adjustment on it.
Several people have had this prob and they fixed it like that.
Aragorn
26-05-04, 07:24 PM
does the pedal hit the floor?
if so there is defo air in the system
u will probably need to bleed the front and the rears together - starting with the drivers rear, then pass rear, drivers front, pass front
and if your using an easi-bleed kit make sure you only crack the bleed nipples open a teeny amount or air can seep back in thru the threads
also makesure nipples are at the top
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.