Digi dash

[ad19car]

Hi ppl,

Does anyone know what wires go where from the transducer, also after finishing off the wiring for the digi dash I've found two wires that aren't being used by the digi dash, from the nova loom - its a gte by the way. Is this normal, as all the digi dash wires are all being used, could one of them be the ecu warning signal? HELP!

Thanks all

[Nick]

the Blue/Red wire from the transducer will go to the Blue/Red wire on the back of the dash, this controls the speedo. then the Brown wire goes to earth and the black to live. I think it's those 3 wires, the car aint at my house so i can't check !

you should have a couple of spare wires, such as the Oil pressure wire (maybe, depends on your car) the black trailer telltail e.t.c !

[Nick]

ohhh, you got spare wires on your GTE loom, sorry !

one of them could well be the ECU light...

i think that i have one or two spare wires, but mines a 1.2 so it'l be different !

[ad19car]

Thanks for the info, will try tomorrow - should be fun - with a mark 1 dash!! :?