PDA

View Full Version : what webers on a 1.2 standard?



novafling
28-04-04, 05:05 PM
just wondering wht kind of webers i could put onto my standard 1.2? no chance of any kind of turbo ones?

Philsutton
28-04-04, 05:06 PM
cant see why twin 40s wont go on, would be interesting to see some on a 1.2, also i think a 32/34 will go on.

Stuart
28-04-04, 05:21 PM
what kind of idiot would fit T40's on a 1.2......... oh hang on lol.


anything has to be better than the pierburg piece of crap that vaux in their infinite wisdom fitted.

novafling
28-04-04, 05:46 PM
so i could put t40's or 32/34 on it then? whats th comparison, can anyone tell me about th t40's ? the speed and power of them both? how easy would it be to fit them ontoo a standard 1.2? would i have to change anything else? coz i only have 4speed. cheers.

Snowface
28-04-04, 06:13 PM
hold your horses novafling.

You won't need to change the gearbox or anything else other than the inlet manifold, throttle cable and the actual carburettor.

The 32/34 DMTL will give you about 5-8bhp from the standard 1b1 pierburg. (You will need a 1300sr inlet manifold)

and the T40's will increse power by about 15bhp (seens you only got a standard exzhaust and cam).

32/34 you can get sorted for second hand about ?150-200 (u need a diff air filter, 1.2 won't fit).

T40's will be about ?200-300.

novafling
28-04-04, 08:30 PM
any way of putting turbo onto a 1.2?

Snowface
28-04-04, 08:34 PM
where ther's a will, there's a way.

will cost ?2000-4000 from courtnay if they can do it.

novafling
28-04-04, 08:36 PM
holy s**t, maybe not then!

Jack
28-04-04, 08:44 PM
You could probably butcher a turbo from a R5GTT or maybe vaux diesel... but don't expect it to last long :P

Adam
29-04-04, 07:03 PM
Just go for the Weber 32/34 carb.
Its the best for around ?100.

Jack
29-04-04, 07:12 PM
Or you could try picking a 32/34DTML up from a scrappy dirt cheap (remove the weber tag, hehe :wink: )... ebay quite often has them pop up and go for anything around ?30-75.

T40s you'll be looking at about ?200-250 second hand, or about ?600 new (carbs, manifold, alternator bracket). Of course to get the best out of both you'd be advised to spend a few extra quid on a RR setup.

Adam
29-04-04, 07:29 PM
Deffo check ebay, some bargains go on there,
look here, ?10 with inlet manifold(1.3SR)/adaptor plate etc
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10404&item=2475717080&rd=1

novafling
29-04-04, 07:30 PM
ive been offered a weber 32/34 dtml twin choke with manifold and k&n air ilter for ?130.

benji
29-04-04, 07:47 PM
i paid ?225(new) for the one i had. plus ?40 for the filter who has offered you the carb?

cooper_nova
29-04-04, 08:48 PM
wot carbs can u fit on a 1ltr then??

5_door owner
29-04-04, 09:55 PM
what kind of idiot would fit T40's on a 1.2......... oh hang on lol.


this guy did
http://www.novaload.net/images/car_images/1392big6.jpg

Snowface
29-04-04, 10:57 PM
wot carbs can u fit on a 1ltr then??

next to none.

the 1.0 carb and engine is not as tunable or worth while trying.

Be cheaper to get a 1.3sr engine for ?50 and stick in there.

cooper_nova
29-04-04, 11:01 PM
wot carbs can u fit on a 1ltr then??

next to none.

the 1.0 carb and engine is not as tunable or worth while trying.

Be cheaper to get a 1.3sr engine for ?50 and stick in there.

:cry: cheers mate i'm getting a 2.0 8v when this lump goes bang, guess i'll just have to make do wiv the 40-50 hp i got till then!!!(had the head skimmed by 2mm and valves adjusted too hence rough figure)
<<<<thinking of how to make me lump go bang!!
:lol:

Gazza14SR
29-04-04, 11:09 PM
wot carbs can u fit on a 1ltr then??

next to none.

the 1.0 carb and engine is not as tunable or worth while trying.

Be cheaper to get a 1.3sr engine for ?50 and stick in there.

:cry: cheers mate i'm getting a 2.0 8v when this lump goes bang, guess i'll just have to make do wiv the 40-50 hp i got till then!!!(had the head skimmed by 2mm and valves adjusted too hence rough figure)
<<<<thinking of how to make me lump go bang!!
:lol:

U sure your ready for that big of a step? if so, go steady ;)

cooper_nova
29-04-04, 11:16 PM
[/quote]

U sure your ready for that big of a step? if so, go steady ;)[/quote]

yeah thanx 4 ur concern mate but i'm 24 or 25yrs old(can't b bothered to work it out and the wifes in bed lol) been driving since i woz 18yrs and used to have a MK2 escort RS2000 wiv 186bhp @ rear wheels(wiv dyno read out) and bcoz of previous jobs driven all mannor of jags/scoobies/astons and other normal motors too

Gazza14SR
29-04-04, 11:20 PM
U sure your ready for that big of a step? if so, go steady ;)[/quote]

yeah thanx 4 ur concern mate but i'm 24 or 25yrs old(can't b bothered to work it out and the wifes in bed lol) been driving since i woz 18yrs and used to have a MK2 escort RS2000 wiv 186bhp @ rear wheels(wiv dyno read out) and bcoz of previous jobs driven all mannor of jags/scoobies/astons and other normal motors too[/quote]

Go For It!

nova_rally
30-04-04, 06:43 PM
1.0 already has a Weber on it as standard - 32TL

Alan

_JH_
30-04-04, 07:07 PM
lol. its hardly a performance weber setup though